Effect of spindle design on spindle dynamics and chatter stability

Date

2021-07-23

Author

Özşahin, Orkun
Budak, Erhan
Rahimzadeh Berenji, Kaveh

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

91
views

0
downloads

URI

https://hdl.handle.net/11511/98467

Conference Name

International Symposium on Precision Engineering and Sustainable Manufacturing (PRESM)

Collections

Department of Mechanical Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Effect of Feed Composition on the Gas Separation Performance of Binary and Ternary Mixed Matrix Membranes Sen, Deger; Yılmaz, Levent; Kalıpçılar, Halil (Informa UK Limited, 2013-03-01) Binary and ternary component mixed matrix membranes comprised of zeolite 4A and p-nitroaniline (pNA) in the polycarbonate (PC) matrix were prepared and appraised in gas separation. For comparison, homogenous membranes of PC and PC/pNA membranes were also investigated. The membranes were utilized to separate binary mixtures of CO2/CH4, H2/CH4, and CO2/N2. The effect of feed composition on the separation performance of membranes was investigated. Separation factors and ideal selectivities were similar for the...
Effect of compatibilizers on the gas separation performance of polycarbonate membranes Şen, Değer; Yılmaz, Levent; Kalıpçılar, Halil; Department of Chemical Engineering (2003) In this study, the effect of compatibilizers on the gas separation performance of polycarbonate (PC) membranes was investigated. Membranes were prepared by solvent evaporation method. They were characterized by single gas permeability measurements of O2, N2, H2 and CO2 as well as scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and Fourier transform infrared spectrometry (FTIR). Membranes containing 0.5 to 10 w% p-nitroaniline (pNA) were prepared to study the effect of compatibili...
Effect of Tube Processing Methods on Microstructure and Mechanical Properties of Nanostructured Ferritic Alloys Aydoğan Güngör, Eda; Maloy, Stuart (2016-02-18)
Effect of tube processing methods on the texture and grain boundary characteristics of 14YWT nanostructured ferritic alloys Aydoğan Güngör, Eda; Anderoglu, O.; Maloy, S. A.; Vogel, S. C.; Odette, G. R.; Lewandowski, J. J.; Hoelzer, D. T.; Anderson, I. E.; Rieken, J. R. (2016-04-01) Texture and microstructure of tubes and plates fabricated from a nanostructured ferritic alloy (14YWT), produced either by spray forming followed by hydrostatic extrusion (Process I) or hot extrusion and cross-rolling a plate followed by hydrostatic tube extrusion (Process II) have been characterized in terms of their effects on texture and grain boundary character. Hydrostatic extrusion results in a combination of plane strain and shear deformations which generate low intensity alpha- and gamma-fiber compo...
Effect of cold rolling and annealing parameters on the microstructure and mechanical properties of dual phase steels Poyraz, Okan; Ögel, Bilgehan; Department of Metallurgical and Materials Engineering (2020) This study consists of change in the microstructure and mechanical properties of the 0.14C-1.98Mn steel with different cold rolling ratios, annealing temperature and annealing time. The starting sheet metal is 2.8mm thick and have a microstructure of ferrite-pearlite in as-received condition. Samples are cold rolled such that either 30%, 45% or 60% cold rolling is achieved. In order to see the change in microstructure below and in the intercritical temperatures, samples are annealed for 5 minutes or 10 minu...

Citation Formats

O. Özşahin, E. Budak, and K. Rahimzadeh Berenji, “Effect of spindle design on spindle dynamics and chatter stability,” presented at the International Symposium on Precision Engineering and Sustainable Manufacturing (PRESM), Jeju-Si, Güney Kore, 2021, Accessed: 00, 2022. [Online]. Available: https://hdl.handle.net/11511/98467.