Ti-6Al-4V Üzerine Boşluk Doldurucu Özellikte Pürüzsüz ve Dirençli Aljinat/Jelatin Arafaz Kaplaması

2021-12-19

Suggestions

Tinin Görüngübilimi'nde Anımsama ve Özverinin Rolü
Çırakman, Elif (2011-07-01)
Microstructural and elecrochemical characterization of Ti-6A1-4V ELI alloy
Topçuoğlu, Melih; Aydınol, Mehmet Kadri; Department of Metallurgical and Materials Engineering (2006)
In this study, the evolution of structure and the relationship between microstructure and corrosion behavior of the Ti-6Al-4V ELI (Extra Low Interstitial) alloy was investigated in Ringer’s solution at 37 ± 0.1 oC. Initially, different heat treatments were performed in order to obtain several microstructures which were; Widmanstätten α for furnace cooling (FC), basket-weave α for air cooling (AC), martensite (α') for water quenching (WQ) from 1060 oC, and aged martensite for ten hours at 500, 600, 700, 800,...
Production of Ti-6Al-4V alloy by 3D electron beam melting technique and development of itspost treatments
Doğu, Merve Nur; Dericioğlu, Arcan Fehmi; Department of Metallurgical and Materials Engineering (2019)
In this thesis, the effects of production variables in electron beam melting (EBM) and post-processing on the materials’ and mechanical properties of Ti-6Al-4V alloy were investigated by considering the microstructural change. Ti-alloy samples were produced at 0o, 45o and 90o with respect to building plate. Surface polishing with HF solution was applied to reduce the surface roughness. On the other hand, post-heat treatments, namely, 2-step thermo-hydrogen processing (THP) and annealing, were conducted to i...
Ti esaslı Implantların Termal Plazma ile Hidroksiapatit Kaplanması
Öztürk, Tayfur(2016-12-31)
Bu çalışma, ODTÜ Metalurji ve Malzeme Mühendisliği Bölümünde mevcut R.F. plazma kullanılmak sureti ile Ti esaslı altlıkların HA ile kaplanmasını konu almaktadır. Çalışma HA parçacıkların plazma nedeni ile maruz kalınacak yüksek sıcaklıklar nedeni oluşacak yapısal değişlikleri minimumda tutmayı ve ilave olarak kaplama altlık arası arayüzey dayancını en iyi kılan koşulların tespitini hedeflemekledir. Projenin geleneksel uygulamalardan temel farkı HA beslemesinin nanoboyutlu HA parçacıkların uygun bir sıvı i...
Effects of anodizing parameters on the formation of titanium dioxide nanotube arrays on Ti6Al4V alloy
Bölükoğlu, Zeynep Ayça; Karakaya, İshak; Department of Metallurgical and Materials Engineering (2015)
Titanium dioxide thin films with nanoporous structures recently gained great interest due to their large surface area and high reactivity properties in their applications. One of the methods used to form titanium dioxide nanostructures is anodizing the surface of titanium and its alloys in F- ion containing electrolytes. Effects of hydrofluoric acid (HF) concentration (0.1 to 0.5 wt.%), anodizing potential (10 to 30 V) and time (30 to 180 minutes) on the titanium dioxide nanotube formation were investigated...
Citation Formats
A. E. Pazarçeviren, Z. Evis, and A. Tezcaner, “Ti-6Al-4V Üzerine Boşluk Doldurucu Özellikte Pürüzsüz ve Dirençli Aljinat/Jelatin Arafaz Kaplaması,” presented at the BIOMED2021-TR, Ankara, Türkiye, 2021, Accessed: 00, 2022. [Online]. Available: https://hdl.handle.net/11511/100075.