Design Constructed and Operation of cascade connected voltage transformers for Measuring

1966
Seyhan, Fehim
Show full item record
154
views
0
downloads
https://hdl.handle.net/11511/10260
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Design construction and testing of aa new vane typee positive displacement pump.
Bamyacıoğlu, Ahmet; Department of Mechanical Engineering (1976)
Design assembly and calibration of an experimental setup for various optical measurements
Uzgel, Evren; Öke, Gülay; Department of Physics (2004)
The experimental setup which consisted of the Jarrell-Ash Ebert type scanning monochromator, the Hamamatsu Si PIN Photodiode, a PC connected ADC card and a Tungstenstriplamp operated at different temperatures was assembled. The different parts needing calibration were calibrated with spectral response calibration techniques suitable for our purposes and connected to the experimental setup in a proper way. Spectral response calibrations and transmission measurements in the range 450-800 nm were carried out.
Design of metasurface polarization converter from linearly polarized signal to circularly polarized signal
AKGÖL, OĞUZHAN; ÜNAL, EMİN; ALTINTAŞ, OLCAY; KARAASLAN, MUHARREM; KARADAĞ, FARUK; Sabah, Cumali (Elsevier BV, 2018-01-01)
In this study, we both numerically and experimentally present a metasurface (MS) polarization converter to transform linearly polarized signal into circularly polarized one. The unit cell consists of two rectangular metallic patches placed at the crossed corners of rectangularly arranged inclusions. The results of a full-wave Electromagnetic (EM) simulator are compared to those of free space measurement using two horn antenna at microwave frequency regime. For a linearly polarized antenna, the s-parameters ...
Design of a radio frequency identification (rfid) antenna
Kalaycı, Sefa; Birand, Mehmet Tuncay; Department of Electrical and Electronics Engineering (2009)
Fundamental features of Radio Frequency Identification (RFID) systems used in different application areas will be reviewed. Techniques used in realizing RFID antenna systems will be studied and the procedure to realize a specific RFID antenna type possessing desired characteristics will be described. Electrical properties such as radiation pattern, impedance will be predicted using analytical and/or computer simulation techniques. Experimental investigations will be carried out to complement the theoretical...
Design of an educational purpose multifunctional dc/dc converter board
Bağlan, Fuat Onur; Hava, Ahmet Masum; Department of Electrical and Electronics Engineering (2008)
In this thesis a multifunctional DC/DC converter board will be developed for utilization as an educational experiment set in the switched-mode power conversion laboratory of power electronic courses. The board has a generic power-pole structure allowing for easy configuration of various power converter topologies and includes buck, boost, buck-boost, flyback, and forward converter topologies. All the converters can be operated in the open-loop control mode with a switching frequency range of 30-100 kHz and ...
Citation Formats
F. Seyhan, “Design Constructed and Operation of cascade connected voltage transformers for Measuring,” Middle East Technical University, 1966.
METU IIS - Integrated Information Service open@metu.edu.tr