Effects of pozzolanic additions on grindability and some mechanical properties of pozzolanic cements of different fineness values

Download

056510.pdf

Date

1996

Author

Erdogdu, Korhan

Metadata

Show full item record

Item Usage Stats

58
views

0
downloads

URI

https://hdl.handle.net/11511/10385

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Effects of granulated blast furnace slag trass and limestone fineness on the properties of blended cements Delibaş, Tuğhan; Yaman, İsmail Özgür; Hoşten, Çetin; Department of Cement Engineering (2012) The aim of this research was to determine the effects of the fineness of different mineral additives on loss on ignition, heat of hydration, physical, mechanical and chemical properties of blended cements. For that purpose, portland cement clinker was replaced with granulated blast furnace slag (GBFS), natural pozzolan (NP) and limestone (L) at 6%, 20% and 35% replacement levels. Blended cements containing GBFS and NP were ground to a fineness of 3000, 5000 and 6000 cm2/g. Cements containing L were ground t...
Effects of centrifugation encapsulation method and different coating materials on total antioxidant activity of microcapsules of powdered cherry laurels Tatar, Betül; Şümnü, Servet Gülüm; Öztop, Halil Mecit; Ayaz, Ezgi (2016-12-05)
Effects of Centrifugation Encapsulation Method and Different Coating Materials on the Total Antioxidant Activity of the Microcapsules of Powdered Cherry Laurels Tatar, Betül; Şümnü, Servet Gülüm; Öztop, Halil Mecit; Ayaz, Ezgi (null; 2016-12-06)
Effects of olefin-based compatibilizers on the morphology, thermal and mechanical properties of ABS/polyamide-6 blends Ozkoc, Guralp; Bayram, Göknur; Bayramli, Erdal (Wiley, 2007-04-15) In this study, commercially available epoxidized and maleated olefinic copolymers, EMA-GMA (ethylene-methyl acrylate-glycidyl methacrylate) and EnBACO-MAH (ethylene-n butyl acrylate-carbon monoxide-maleic anhydride), were used at 0, 5, and 10% by weight to compatibilize the blend composed of ABS (acrylonitrile-butadiene-styrene) terpolymer and PA6 (polyamide 6). Compatibilizing performance of these two olefinic polymers was investigated from blend morphologies, thermal and mechanical properties as a functio...
Effects of SiC particulates on the fatigue behaviour of an Al-alloy matrix composite Kaynak, Cevdet (2006-01-01) In this study, the fatigue behaviour of aluminium matrix-silicon carbide (SiC) particulate reinforced composite specimens was investigated in comparison to the matrix aluminium alloy containing 12 wt% Si. Three different weight percentages of SiC particulates: 5, 10, and 15 in the size range of 40-60 gm were injected into the melt. Mg was also added to improve the wettability of Al-alloy matrix over SiC particulates resulting in better interfacial bonding. Test specimens were machined from squeeze casting b...

Citation Formats

K. Erdogdu, “Effects of pozzolanic additions on grindability and some mechanical properties of pozzolanic cements of different fineness values,” Middle East Technical University, 1996.