Cathodic protection of aluminium and its alloys from pitting corrosion in 3.5% NaCL solution

Download
029235.pdf
1993
Şen, Erdem
Show full item record
83
views
0
downloads
https://hdl.handle.net/11511/10646
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Cathodic hydrogen embrittlement of pre-stressing steel wires in simulated concrete environments.
Masadeh, Sami; Doruk, Mustafa; Department of Metallurgical Engineering (1996)
Cathodic protection of aluminum alloys from pitting corrosion in sea water
Yinsel, G. Şevket; Doruk, Mustafa; Department of Metallurgical Engineering (1988)
Diametral strength testing of hydroxyapatites doped with yttrium and fluoride
Evis, Zafer; Sun, Z. P. (2010-10-01)
This study aimed to investigate the diametral strength testing of hydroxyapatite (HA) doped with Y and fluoride with different compositions. Hydroxyapatites were synthesised by precipitation method and sintered at 900, 1100 and 1300 degrees C for 1 h. High amounts of doping caused a decrease in relative densities of HAs. Higher sintering temperatures helped in increasing the relative densities. No second phases were observed by X-ray diffraction spectra of 2.5 mol.-%Y and 2.5 mol.-%F doped HA after the sint...
Rheological properties of extruded dispersions of flaxseed-maize blend
WU, Min; Lİ, Dong; WANG, Li-Jun; Özkan, Necati; Mao, Zhi-Huai (2010-06-01)
Rheological properties of the extruded pastes of various extrusion conditions were investigated by dynamic oscillation and creep-recovery tests. Temperature sweep test showed that the starch gelatinization of non-extruded pastes took place at about 67 degrees C and no gelatinization was observed for the extruded sample. Frequency sweep tests could be represented by a Power law model and the samples showed gel-like behavior since storage modulus was much larger than loss modulus. The creep-recovery data were...
Rheological and thermal analysis of bentonites for water base drilling fluids
Kök, Mustafa Verşan (Informa UK Limited, 2004-02-01)
The objective of this research is to investigate the rheological and thermal properties of bentonites for water base drilling fluids. Rheological experiments were performed with 4 different bentonite samples and clay percentages, cation-exchange capacity (CEC), swelling volume, pH, and physical and rheological properties of the samples are determined. The thermal behaviors of bentonite samples were investigated using simultaneous thermogravimetry (TG/DTG) and differential thermal analysis (DTA) techniques. ...
Citation Formats
E. Şen, “Cathodic protection of aluminium and its alloys from pitting corrosion in 3.5% NaCL solution,” Middle East Technical University, 1993.
METU IIS - Integrated Information Service open@metu.edu.tr