Cathodic protection of aluminum alloys from pitting corrosion in sea water

Yinsel, G. Şevket


Cathodic protection of aluminium and its alloys from pitting corrosion in 3.5% NaCL solution
Şen, Erdem; Doruk, Mustafa; Department of Metallurgical Engineering (1993)
Cathodic Arc Discharge for Synthesis of Carbon Nanoparticles
Ünalan, Hüsnü Emrah (CRC Press, 2011-11-01)
In this chapter, the authors report further experimental details and several physical analyses of the floating powder and propose a model for the formation mechanism. They discussed the ability to analyze carbon nanoparticle formation in terms of a charged dusty plasma process. The detected carbon nanoparticles using a Langmuir probe technique are in agreement with the presence of fullerene-sized molecules in the plasma. The plasma can also be visually observed to surround the anode, indicating the directio...
Cathode edge displacement by voiding coupled with grain boundary grooving in bamboo like metallic interconnects by surface drift-diffusion under the capillary and electromigration forces
Ogurtani, Tarik Omer; Akyildiz, Oncu (Elsevier BV, 2008-02-01)
The kinetics of cathode edge shrinkage and displacement (drift) coupled strongly with the grain boundary (GB) grooving is investigated using the novel mathematical model developed by Ogurtani, in sandwich type thin film bamboo lines. The computer simulations are performed under the constant current (CC) and the switch-over constant voltage (SOCV) operations. The cathode drift velocity and the cathode failure time show the existence of two distinct phases, depending upon the normalized electron wind intensit...
Cathodic hydrogen embrittlement of pre-stressing steel wires in simulated concrete environments.
Masadeh, Sami; Doruk, Mustafa; Department of Metallurgical Engineering (1996)
Cathode-ray tube terminal for use in teleinformation system of national load dispatching project of T.E.K.
Gerçeker, Şükrü; Department of Electrical Engineering (1979)
Citation Formats
G. Ş. Yinsel, “Cathodic protection of aluminum alloys from pitting corrosion in sea water,” Middle East Technical University, 1988.