Production of silicon carbide reinforced aliminium matrix composites

Download

035537.pdf

Date

1994

Author

Güyer, Bülent Sabri

Metadata

Show full item record

Item Usage Stats

103
views

0
downloads

URI

https://hdl.handle.net/11511/10651

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Production of Potassium Titanate Whisker Reinforced Dental Composites Kapusuz, Derya; Park, Jongee; Öztürk, Abdullah (2013-01-01) Potassium titanate (K2O.nTiO2) whiskers (KTWs) were produced by sol-gel method and embedded into UDMA-TEGDMA resins to produce KTW reinforced composites that could be used for both anterior and posterior fillings. The effect Ti/K molar ratio on the chemical, structural and functional properties of the KTWs was investigated using XRD, HR-TEM, and BET analysis. Morphology and the surface properties of the KTWs rely on the Ti/K ratio. However, HR-TEM studies clarified that the KTWs grow along [110] axis regard...
Production of Potassium Titanate Nanowire Reinforced UDMA TEGDMA Copolymers for Dental Applications and their properties Kapusuz, Derya; Park, Jongee; Öztürk, Abdullah (2014-12-05)
Production of Silica Fume-Based Geopolymer Foams Shakouri, Sahra; Erdoğan, Sinan Turhan (2018-09-14)
Production of flame retardant polyester composites and fibers Akan, Mithat; Bayramlı, Erdal; Bayram, Göknur; Department of Polymer Science and Technology (2013) Poly(ethylene terephthalate) (PET) fiber is one of the leading synthetic fibers in textile industry. However, its flame retardant properties are poor to be used in certain applications, therefore flame retardant additives are generally used in order to improve flame retardant properties of PET. The main objective of this study is to find suitable flame retardant additives for PET that can synergize with each other and that can improve the flame retardant properties without compromising the mechanical proper...
Production of Al-Cu metallic foam Karakuş, Selim; Öztürk, Tayfur; Department of Metallurgical and Materials Engineering (1998)

Citation Formats

B. S. Güyer, “Production of silicon carbide reinforced aliminium matrix composites,” Middle East Technical University, 1994.