Microstructural and phase studies of titanium carbide particulate reinforced aluminium matrix composites

Download
056821.pdf
1996
Şahin, Ayşegül
Show full item record
42
views
0
downloads
https://hdl.handle.net/11511/10684
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Microstructural characterization and tensile properties of hot pressed Al-SiC composites prepared from pure Al and Cu powders
Ögel, Bilgehan; Gürbüz, Rıza (2001-03-31)
A conventional hot pressing method was used to produce Al-Cu-SiC particulate metal matrix composites. The matrix alloy was prepared from elemental powders of Al and 5 wt.% Cu. The composite comprises 13.3 or 27.2 vol.% SiCp with an average size of 10 mum. The powder mixtures were hot pressed uniaxially under nitrogen atmosphere. It is shown that Cu aids in the Formation of a liquid phase. Practically pore free structures are obtained after pressing at 600 degreesC, Elastic modulus, tensile strength and yiel...
Microstructural and mechanical characterization of metal active gas welded joint between cast iron and low carbon steel
Ertürk, Murat Tolga; Gürbüz, Rıza; Batıgün, Caner; Department of Metallurgical and Materials Engineering (2011)
This study focuses on joining pearlitic ductile cast iron with low carbon steel by welding and investigation of this joint in microstructural and mechanical viewpoints. For this purpose E355 steel and GJS600-3 cast iron were joined using metal active gas (MAG) welding process by G3Si1 filler wire. The joining process is shaped mainly by the problems related to the low weldability of cast. Preheating was applied to prevent formation of cooling cracks and effects of post weld heat treatments (PWHT) were surve...
Microstructural, biological and mechanical investigations of hydroxyapatite-β-tricalcium phosphate composites doped with strontium and fluoride
Pourreza, Elmira; Evis, Zafer; Department of Engineering Sciences (2016)
The aim of this study was to investigate the microstructure, mechanical and biological properties of biphasic hydroxyapatite--Tricalcium phosphate (HT) and HT substituted with constant fluoride (F−) and varying strontium (Sr2+) amounts. All the samples were synthesized via precipitation method and sintered at 1100°C for 1 h. It was observed that the relative density of the sintered strontium and fluoride doped HT slightly increased. For microstructural analysis, X-ray diffraction (XRD), scanning electron m...
Microstructural and elecrochemical characterization of Ti-6A1-4V ELI alloy
Topçuoğlu, Melih; Aydınol, Mehmet Kadri; Department of Metallurgical and Materials Engineering (2006)
In this study, the evolution of structure and the relationship between microstructure and corrosion behavior of the Ti-6Al-4V ELI (Extra Low Interstitial) alloy was investigated in Ringer’s solution at 37 ± 0.1 oC. Initially, different heat treatments were performed in order to obtain several microstructures which were; Widmanstätten α for furnace cooling (FC), basket-weave α for air cooling (AC), martensite (α') for water quenching (WQ) from 1060 oC, and aged martensite for ten hours at 500, 600, 700, 800,...
Microstructural and mechanical characterization of duplex stainless steel grade 2205 joined by hybrid plasma and gas metal arc welding
Tolungüç, Burcu; Gür, Cemil Hakan; Gürbüz, Rıza; Department of Metallurgical and Materials Engineering (2012)
In the present study, the applicability of the hybrid plasma arc welding, in which a keyhole is responsible of deep penetration and a filler wire electrode supplies a high deposition rate, was examined. The microstructural evolutions in grade 2205 duplex stainless steel plates joined by keyhole and melt-in techniques were investigated. The specimens obtained from welded plates having thickness of 8 mm were examined via optical and scanning electron microscopy. Metallographic investigations were supported by...
Citation Formats
A. Şahin, “Microstructural and phase studies of titanium carbide particulate reinforced aluminium matrix composites,” Middle East Technical University, 1996.
METU IIS - Integrated Information Service open@metu.edu.tr