Preparation and electrical structural optical characterization of InSe thin films

Download
068355.pdf
1997
Parlak, Mehmet
Show full item record
141
views
0
downloads
Thin films., Semiconductors.
https://hdl.handle.net/11511/1095
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Preparation and characterization of silicon thin films
Atılgan, İsmail; Katırcıoğlu, Bayram; Department of Physics (1993)
Fabrication and doping of thin crystalline Si films prepared by e-beam evaporation on glass substrate
Sedani, Salar Habibpur; Turan, Raşit; Ünalan, Hüsnü Emrah; Department of Micro and Nanotechnology (2013)
In this thesis study, fabrication and doping of silicon thin films prepared by electron beam evaporation equipped with effusion cells for solar cell applications have been investigated. Thin film amorphous Si (a-Si) layers have been fabricated by the electron beam evaporator and simultaneously doped with boron (B) and phosphorous (P) using effusion cells. Samples were prepared on glass substrates for the future solar cell operations. Following the deposition of a-Si thin film, crystallization of the films h...
Mechanism and characterization studies on boron carbides deposited by chemical vapor deposition technique
Karaman, Mustafa; Özbelge, Hilmi Önder; Sezgi, Naime Aslı; Doğu, Timur (2005-12-02)
Boron carbide was produced in an impinging jet CVD reactor from a gas mixture of BCl3, CH4 and H-2. The mass transfer limitations on the reaction kinetics were minimised by the jet impingement on the substrate surface. XPS characterization of the produced deposits revealed a nearly pure boron carbide phase containing small amounts of oxy-boron and oxy-carbon species. After a detailed kinetic study, a reaction model was proposed to predict the rates of boron carbide and dichloroborane formation reactions. In...
Investigation of the electromagnetic properties of single walled carbon nanotube thin films
Küçükyıldız, Şeyda; Dericioğlu, Arcan Fehmi; Ünalan, Hüsnü Emrah; Department of Metallurgical and Materials Engineering (2013)
The work presented in this thesis can be divided in two parts. First part discusses the dispersion and deposition routes of single walled carbon nanotube (SWNT) thin films. Two different types of SWNTs and several dispersing agents were examined to achieve a homogeneous SWNT solution. A tip-sonicator and an ultrasonic bath was compared and it has been found that tip-sonicator increases the efficiency of SWNT dispersions. Vacuum filtration and spray coating techniques were utilized for the deposition of SWNT...
Preparation of lead free BZT-BCT thin films by chemical solution deposition and their characterization
Çeltikçi, Barış; Özenbaş, Ahmet Macit; Department of Metallurgical and Materials Engineering (2012)
In the presented thesis, lead-free Ba(Ti0.8Zr0.2)O3-(Ba0.7Ca0.3)TiO3 (BZT-BCT) thin films were deposited on Pt/TiO2/SiO2/Si substrates using chemical solution deposition method and then the effect of process parameters were investigated to obtain optimum parameters of these lead-free thin films. The phase was selected near to the morphotropic phase boundary (MPH) to increase the number of polarization directions where rhombohedral and tetragonal phases exist together. In this study, the effect of sintering ...
Citation Formats
M. Parlak, “Preparation and electrical structural optical characterization of InSe thin films,” Ph.D. - Doctoral Program, Middle East Technical University, 1997.
METU IIS - Integrated Information Service open@metu.edu.tr