A preliminary work for hardware implementation of optimum decoding-based smoothing algorithm

Download
056567.pdf
1996
Dural, Özgür
Show full item record
57
views
0
downloads
https://hdl.handle.net/11511/11047
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

A Study for Development of Propagation Model Based on Ray Tracing for Coverage Prediction in Terrestrial Broadcasting Systems
Tabakcioglu, Mehmet Baris; Ozmen, Ahmet; KARA, ALİ (2009-04-11)
In this work, improvements on propagation prediction models based on ray tracing in coverage estimation for digital broadcasting systems are presented. For this purpose, firstly propagation models based on Geometrical Theory of Diffraction (GTD) are discussed, and then an improved model is proposed for prediction of propagation path loss or electric field strength at the receiver. The proposed model incorporates first order expansion of classical GTD in field computation and convex hull for ray tracing. Sim...
A Case study on planning of combined gravity and pumping irrigartion system Girmir
Çağlayan Varlık, Aylin; Uluatam, Semra Siber; Department of Civil Engineering (1996)
A theoretical study of JP-10 hydroperoxidation
Türker, Burhan Lemi; Varis, Serhat; Bayar, Caglar Celik (2013-02-01)
P-10 (C10H16) is one of cyclic, high-energy-density fuels being used in aircrafts. This single component fuel takes the advantage of increased energy storage available through its strained cyclic geometry. In recent years, the quality of petroleum feedstocks used by refineries has decreased. Examination of fuels refined by different processes has indicated that significantly higher peroxide concentrations exist in fuels which have been severely hydrotreated. Hydroperoxide concentration has been found to be ...
A STUDY ON OPTIMUM LAYOUT DESIGN OF PIEZOMETERS IN EARTH-FILL DAMS
Gökmen, Salih; Yanmaz, Ali Melih; Department of Civil Engineering (2021-7)
Excessive pore water pressure is one of the causes of failure in earth-fill dams. Therefore, distribution of pore water pressure within the dam body must be observed throughout the lifetime of the structure. The observation can be performed by means of an instrumentation system installed within the embankment. The system consists of sensors placed at specific loations. There are no standard guidelines to assign required number of the sensors and their proper locations within the body. Currently, instrumenta...
A Case Study on the Utilization of Problem and Solution Domain Measures for Software Size Estimation
AYYILDIZ, TÜLİN ERÇELEBİ; Koçyiğit, Altan (2016-09-02)
Detailed requirements is the primary input of software size measurement and effort estimation methodologies and a significant amount of time and expertise is needed for size measurement. In order to streamline size measurement and effort estimation, this study exploits the correlations between the problem domain measures such as the number of distinct nouns and distinct verbs in the requirements artifacts and the solution domain measures such as the number of software classes and methods in the correspondin...
Citation Formats
Ö. Dural, “A preliminary work for hardware implementation of optimum decoding-based smoothing algorithm,” Middle East Technical University, 1996.
METU IIS - Integrated Information Service open@metu.edu.tr