Effect of an intercritical heat treatment (IHT) on hardenability of 32 CrMoV 1210 steel.

Date

1984

Author

Bükulmez, İlhan

Metadata

Show full item record

Item Usage Stats

URI

https://hdl.handle.net/11511/11054

Collections

Suggestions

Effect of an intercritical heat treatment on temper embrittlement behaviour of 32 CrMoV 1210 steel. Pehlivantürk, Necip Yalçın; Department of Metallurgical Engineering (1984)
Effect of Seismically Induced Cyclic Displacements on Low Cycle Fatigue Performance of Integral Bridge Piles Dicleli, Murat (2010-08-08)
Effect of microstructural modification on damage tolerance of 34CrMo4 shaft steel Ozcan, Burak; Gurer, Goksu; Gür, Cemil Hakan (Wiley, 2020-06-01) Overall damage tolerances of the heat-treated 34CrMo4 steels having ferritic-pearlitic, bainitic, and tempered-martensitic microstructures were evaluated based on their threshold stress intensity factor prior to small crack propagation, fatigue strength, and fracture toughness under static loading. Kitagawa-Takahashi diagrams were constructed to determine the limiting size of small crack propagation. The micromechanical effects of carbide morphology and phase distribution on quasi-static and dynamic mechani...
Effect of drainage disc spacing on the rate of heat transfer on fluted tubes. Büyükyılmaz, Afife; Department of Chemical Engineering (1987)
Effect of type compaction on one-dimensional compression behavior of two clays with low and medium plasticity. Yarımağan, Mehmet Y; Department of Civil Engineering (1971)

Citation Formats

İ. Bükulmez, “Effect of an intercritical heat treatment (IHT) on hardenability of 32 CrMoV 1210 steel.,” Middle East Technical University, 1984.