The metallography of double austenitization of AISI M2 high speed tool steel.

1984
Soylu, Bilgin
Show full item record
133
views
0
downloads
https://hdl.handle.net/11511/11063
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

The metallography of tempering of double austenitized AISI M2 high speed tool steel.
Güngen, Ayşegül K; Department of Metallurgical Engineering (1985)
The synthesis and characterization of aluminum loaded SBA-type materials as catalyst for polypropylene degradation reaction
Obali, Zeynep; Sezgi, Naime Aslı; Doğu, Timur (2011-12-01)
The performance of pure and aluminum containing SBA-type catalysts prepared using different aluminum sources and different Al/Si ratios were investigated in the polypropylene degradation reaction using a thermogravimetric analyzer. For the synthesis of catalysts, aluminum isopropoxide and aluminum sulphate were used as the aluminum sources. Synthesized materials had high surface areas and exhibited nitrogen adsorption isotherms of type IV. EDS results showed that the aluminum incorporation into the structur...
The analysis of platinum metals in platinum catalysts by thin layer chromatography
Merdivan, Melek; Aygün, Rüveyde Sezer; Külcü, Nevzat; Department of Chemistry (1994)
The numerical inversion of laplace transform with the applications to dynamic response of elastic rods.
Canat, Ahsen; Department of Engineering Sciences (1975)
THE SIMULATION OF ATMOSPHERIC FLUIDIZED-BED COMBUSTORS WITH IN-SITU DESULFURIZATION
Selçuk, Nevin; ONAL, I (1993-12-01)
A previously developed and tested mathematical model for the simulation of both the bed and freeboard of atmospheric fluidised-bed combustors (AFBCs) burning high- and low-quality coals was modified to incorporate calcination of limestone and subsequent sulphation taking place in the emulsion phase, in accordance with a deactivation model similar to those for catalysts. The new model was then used to investigate the effect of excess air and Ca:S molar ratio on the behaviour of a pilot-scale AFBC, for which ...
Citation Formats
B. Soylu, “The metallography of double austenitization of AISI M2 high speed tool steel.,” Middle East Technical University, 1984.
METU IIS - Integrated Information Service open@metu.edu.tr