The numerical inversion of laplace transform with the applications to dynamic response of elastic rods.

Date

1975

Author

Canat, Ahsen

Metadata

Show full item record

Item Usage Stats

92
views

0
downloads

URI

https://hdl.handle.net/11511/4831

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

The numerical study of pumping configurations on the lasing efficiency in photonic crystal fiber Raman laser Berberoglu, Halil; Tarman, Işık Hakan (2013-01-01) Cw Raman lasing characteristics of highly nonlinear photonic crystal fibers (PCF) are numerically investigated. The numerical approach is based on a pseudospectral algorithm developed earlier. Different pumping (forward, backward, and bidirectional) configurations are numerically simulated and the resultant efficiencies are shown to be the same under similar conditions. It is shown that the differences arise due to the pump being either single- or double-pass. (c) 2012 Elsevier GmbH. All rights reserved.
The metallography of double austenitization of AISI M2 high speed tool steel. Soylu, Bilgin; Department of Metallurgical Engineering (1984)
The application of fracture mechanics to stress corrosion cracking in a low strength steel. Utkanlar, Necdet; Department of Metallurgical Engineering (1978)
The experiment of pulsation on parallel flow and experimental verification of frequency parameter. Özsoy, Mehmet; Department of Mechanical Engineering (1970)
THE SIMULATION OF ATMOSPHERIC FLUIDIZED-BED COMBUSTORS WITH IN-SITU DESULFURIZATION Selçuk, Nevin; ONAL, I (1993-12-01) A previously developed and tested mathematical model for the simulation of both the bed and freeboard of atmospheric fluidised-bed combustors (AFBCs) burning high- and low-quality coals was modified to incorporate calcination of limestone and subsequent sulphation taking place in the emulsion phase, in accordance with a deactivation model similar to those for catalysts. The new model was then used to investigate the effect of excess air and Ca:S molar ratio on the behaviour of a pilot-scale AFBC, for which ...

Citation Formats

A. Canat, “The numerical inversion of laplace transform with the applications to dynamic response of elastic rods.,” Middle East Technical University, 1975.