Mechanical evaluation of cemented backfill materials

Download
1997
Çakmakçı, Güray

Suggestions

Mechanical characterization of filament wound composite tubes by internal pressure testing
Karpuz, Pınar; Ankara, Osman Alpay; Department of Metallurgical and Materials Engineering (2005)
The aim of this study is to determine the mechanical characteristics of the filament wound composite tubes working under internal pressure loads, generating data for further investigation with a view of estimating the remaining life cycle of the tubes during service. Data is generated experimentally by measuring the mechanical behavior like strains in hoop direction, maximum hoop stresses that are formed during internal pressure loading. Results have been used to identify and generate the necessary data to ...
Mechanical Characterization of Elastomeric Lattice Parts Produced by Continuous Liquid Interface Production
Özerinç, Sezer; Neshani, Roozbeh; Mcgregor, Davis J.; Tawfick, Sameh; King, William P. (2021-11-29)
Mechanical characterization and modelling of porous polymeric materials manufactured by selective laser sintering
Tekin, Cevdet Murat; Dağ, Serkan; Department of Mechanical Engineering (2009)
Rapid prototyping methods embrace a family of manufacturing methods that are developed to speed up the prototyping stage of product design. The sole needed input for production being the solid model of the part, mold/tool-free production characteristics and the geometric part complexity that can be achieved due to layer-by-layer production have extended the applicability/research areas of these methods beyond prototyping. Local pore formation in part that occurs as a result of the discrete manufacturing nat...
Mechanical properties, durability, and life-cycle assessment of self-consolidating concrete mixtures made with blended portland cements containing fly ash and limestone powder
Çelik, Kemal; Akgül, Çağla; Gursel, A. Petek; Mehta, P Kumar; Horvath, Arpad; Monteiro, Paulo JM (2015-02-01)
This paper reports the composition and properties of highly flowable self-consolidating concrete (SCC) mixtures made of high proportions of cement replacement materials such as fly ash and pulverized limestone instead of high dosage of a plasticizing agent or viscosity-modifying chemical admixtures. Self-consolidating concrete mixtures are being increasingly used for the construction of highly reinforced complex concrete elements and for massive concrete structures such as dams and thick foundation. In this...
Mechanical characterization of additively manufactured Ti-6Al-4V aircraft structural components produced by electron beam melting
Yılmaz, Fatih; Şahin, Melin; Gürses, Ercan; Department of Aerospace Engineering (2022-8-25)
Weight reduction of structural parts is one of the most important efforts of design and analysis studies to improve fuel efficiency and flight performance of aerospace vehicles through topology optimization creating complex geometric designs that are lighter but cannot be produced via conventional manufacturing methods. Instead, the manufacturing of the resulting designs is possible with additive manufacturing methods where the final product is obtained by adding layer upon layer to obtain close to the near...
Citation Formats
G. Çakmakçı, “Mechanical evaluation of cemented backfill materials,” Middle East Technical University, 1997.