Mechanical milling of magnesium powders and measurement of their hydrogen sorption characteristics.

Baybörü, Elif


Mechanical characterization and modelling of porous polymeric materials manufactured by selective laser sintering
Tekin, Cevdet Murat; Dağ, Serkan; Department of Mechanical Engineering (2009)
Rapid prototyping methods embrace a family of manufacturing methods that are developed to speed up the prototyping stage of product design. The sole needed input for production being the solid model of the part, mold/tool-free production characteristics and the geometric part complexity that can be achieved due to layer-by-layer production have extended the applicability/research areas of these methods beyond prototyping. Local pore formation in part that occurs as a result of the discrete manufacturing nat...
Mechanical Fracturing of Core-Shell Undercooled Metal Particles for Heat-Free Soldering
Çınar, Simge; Chen, Jiahao; Thuo, Martin (Springer Science and Business Media LLC, 2016-02-23)
Phase-change materials, such as meta-stable undercooled (supercooled) liquids, have been widely recognized as a suitable route for complex fabrication and engineering. Despite comprehensive studies on the undercooling phenomenon, little progress has been made in the use of undercooled metals, primarily due to low yields and poor stability. This paper reports the use of an extension of droplet emulsion technique (SLICE) to produce undercooled core-shell particles of structure; metal/oxide shell-acetate ('/'=...
Mechanical Characterization of Elastomeric Lattice Parts Produced by Continuous Liquid Interface Production
Özerinç, Sezer; Neshani, Roozbeh; Mcgregor, Davis J.; Tawfick, Sameh; King, William P. (2021-11-29)
Mechanical characterization of filament wound composite tubes by internal pressure testing
Karpuz, Pınar; Ankara, Osman Alpay; Department of Metallurgical and Materials Engineering (2005)
The aim of this study is to determine the mechanical characteristics of the filament wound composite tubes working under internal pressure loads, generating data for further investigation with a view of estimating the remaining life cycle of the tubes during service. Data is generated experimentally by measuring the mechanical behavior like strains in hoop direction, maximum hoop stresses that are formed during internal pressure loading. Results have been used to identify and generate the necessary data to ...
Mechanical evaluation of cemented backfill materials
Çakmakçı, Güray; Ünal, Erdal; Department of Mining Engineering (1997)
Citation Formats
E. Baybörü, “Mechanical milling of magnesium powders and measurement of their hydrogen sorption characteristics.,” Middle East Technical University, 2001.