Design and implementation of a distributive gas fuel metering system for the dual fuel operation of a diesel engine

Download
068752.pdf
1997
Barut, Erdinç
Show full item record
39
views
0
downloads
https://hdl.handle.net/11511/1156
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Design and implementation of a 200w microinverter for grid connected photovoltaic energy conversion system
Kavurucu, Semih; Hava, Ahmet Masum; Department of Electrical and Electronics Engineering (2014)
As one type of the grid-connected photovoltaic energy conversion systems, micro-inverters (MI, also known as Module Integrated Inverters, MII) are typically designed for residential applications with energy capacities of 3-5 kW and less, in order to provide PV module level energy generation, plug-N-play operation, minimization of the shading effects occurring on the PV module, and flexibility of installation. For the micro-inverter system which can be designed employing variety of topologies, interleaving f...
Design and implementation of a swith mode arc welding system
Yıldırım, Fatih; Hızal, Mirzahan; Department of Electrical and Electronics Engineering (1997)
Design and experimental testing of an adsorbent bed for a thermal wave adsorption cooling cycle
Çağlar, Ahmet; Yamalı, Cemil; Baker, Derek Keıth; Department of Mechanical Engineering (2012)
Poor heat and mass transfer inside the adsorbent bed of thermal wave adsorption cooling cycles cause low system performance and is an important problem in the adsorbent bed design. In this thesis, a new adsorbent bed is designed, constructed and tested to increase the heat and mass transfer in the adsorbent bed. The adsorbent bed is constructed from a finned tube in order to enhance the heat transfer. Additionally, the finned bed geometry is theoretically modeled and the model is solved time dependently by ...
Design and development of a radio frequency energy harvester for low-power sensors
Özdemir, Huriye; Nesimoglu, Tayfun; Sustainable Environment and Energy Systems (2019-1)
This thesis presents a systematic design and implementation of a rectenna. As a beginning, a receiving antenna is proposed. In the design of the receiving antenna, a fractal topology is utilized to widen the antenna bandwidth. Moreover, a rectifier circuit with a proposed dualband matching technique is realized to aggregate the DC power. Ultimately, the broadband fractal antenna and the proposed dual-band rectifier circuit have been assembled to realize the rectenna. In addition, a simple RF spectrum study ...
Design and implementation of a luminescence emission spectrometer
Togay, Evren; Bulur, Enver; Department of Physics (2012)
Luminescence is the emission of light resulting from radiative transition of an atom from an excited state to a ground state. This radiative transition yields emission of photons and the luminescence is the general name which is used to classify “cold emission” other than the blackbody radiation. Spectroscopy involves the measurement of intensity of emitted, absorbed or scattered electromagnetic radiation as a function of wavelength. Thus, it is a valuable tool in the study of understanding the luminescence...
Citation Formats
E. Barut, “Design and implementation of a distributive gas fuel metering system for the dual fuel operation of a diesel engine,” Middle East Technical University, 1997.
METU IIS - Integrated Information Service open@metu.edu.tr