Simulation of uncoded and convolutionally encoded continuous phase frequency shift keyed signals by using signal space method.

Download
023583.pdf
1992
Sancar, Ahmet Gürkan
Show full item record
120
views
29
downloads
https://hdl.handle.net/11511/11820
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Simulation of equal channel angular pressing applied to produce structures with ultrafine-sized grains
Karpuz, Pinar; Şimşir, Caner; Gür, Cemil Hakan (Inderscience Publishers, 2009-01-01)
Severe plastic deformation methods are of great interest in industrial forming applications, as they give rise to significant refinement in microstructures and improvements in mechanical and physical properties. In the 'equal channel angular pressing (ECAP)', which is the most common method for production of ultrafine grained bulk samples, very high plastic strains are introduced into the bulk material without any change in cross section. In this study, the plastic deformation behaviour of the materials sub...
Simulation of a noise spectral density comparison type correlation radiometer.
Ural , A Turgay; Department of Electrical Engineering (1968)
Simulation of orthogonal metal cutting by finite element analysis
Bil, Halil; Kılıç, Engin; Tekkaya, Erman; Department of Mechanical Engineering (2003)
The aim of this thesis is to compare various simulation models of orthogonal cutting process with each other as well as with various experiments. The effects of several process parameters, such as friction and separation criterion, on the results are analyzed. As simulation tool, commercial implicit finite element codes MSC.Marc, Deform2D and the explicit code Thirdwave AdvantEdge are used. Separation of chip from the workpiece is achieved either only with continuous remeshing or by erasing elements accordi...
Simulation of the behaviour of a simple bug using a neural network model.
Zeybek, Atila; Güler, Marifi; Department of Computer Engineering (1993)
Simulation of channel connector behavior using finite element method
Aydoğmuş, Can; Topkaya, Cem; Department of Civil Engineering (2013)
Channel shear connectors are fairly new alternatives to the shear connectors. In this thesis two of the previously done experimental studies were simulated using FEM. First, push-out tests consisted of ten specimens which include European channel sections as shear connectors were modeled in ANSYS. The models with simplistic materials and 2D elements were analyzed. Analysis results were compared with the experimental results. Comparisons showed that, 2D models with bilinear materials were sufficient enough t...
Citation Formats
A. G. Sancar, “Simulation of uncoded and convolutionally encoded continuous phase frequency shift keyed signals by using signal space method.,” Middle East Technical University, 1992.
METU IIS - Integrated Information Service open@metu.edu.tr