A method of solution for nonhomogeneous media with radial flaws.

1973
Aksoğan, Orhan
Show full item record
138
views
0
downloads
Composite materials.
https://hdl.handle.net/11511/11894
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

An approximate dynamic model for layered composites.
Birlik, Gülin A; Mengi, Yalçın; Department of Engineering Sciences (1979)
Effect of resin and fiber on the abrasion, impact and pressure resistance of cylindrical composite structures
Kaya, Derya; Yılmazer, Ülkü; Department of Chemical Engineering (2011)
The aim of this study was to investigate the effects of resin and fiber on the abrasion, impact and internal pressure resistances of fiber reinforced plastic composite pipes produced by continuous filament winding method. For this study, pipe samples were produced with different combinations of resin type, fiber type, fiber amount and fiber length. All the samples were tested in accordance with the related ISO (International Organization for Standardization), DIN (German Standardization Institution) and BSI...
"ON A GENERAL APPROACH TO FREE VIBRATIONS RESPONSE of INTEGRALLY-STIFFENED and/or STEPPED-THICKNESS RECTANGULAR PLATES or PANELS"
Yuceoglu, Umur; Javanshir, Jaber; Guvendik, Oezen (2008-11-06)
This study is mainly concerned with a "General Approach" to the "Theoretical Analysis and the Solution of the Free Vibrations Response of Integrally-Stiffened and/or Stepped-Thickness Plates or Panels with Two or more Integral Plate Stiffeners". In general, the "Stiffened System" (regardless of the number of "Plate Stiffeners") is considered to be composed of dissimilar "Orthotropic Mindlin Plates" with unequal thicknesses. The dynamic governing equations of the individual plate elements of the "System" and...
Numerical investigation of delamination in L-shaped cross-ply composite bracket
Gümüş, M.; Gözlüklü, B.; Çöker, Demirkan (null; 2014-01-01)
Interlaminar normal stresses are induced with interlaminar shear stresses leading to mixed-mode delamination (MMD) in curved cross-ply composite laminates. Dynamic mixed-mode delamination is studied using explicit finite element method and Cohesive Zone Modelling Dynamic response of the specimen is compared with the experiments.
Modeling of mixed-mode delamination in composite t-joints
Gülaşık, Hasan; Çöker, Demirkan; Department of Aerospace Engineering (2014)
Stiffened panel, consisting of skin and stiffeners, is the main design option for aerospace structures. When manufactured with laminated composite materials, they provide high strength/stiffness to weight ratio, resulting in high performance and less fuel consumption. T-joint is one of the typical configurations for composite stiffened panels which consist of a skin panel and stiffeners co-bonded or co-cured together with a filler material between them. T-joints are prone to delaminations between skin/stiff...
Citation Formats
O. Aksoğan, “A method of solution for nonhomogeneous media with radial flaws.,” Ph.D. - Doctoral Program, Middle East Technical University, 1973.
METU IIS - Integrated Information Service open@metu.edu.tr