Computer-aided dynamic modelling of spur gears.

1987
Arıkan, Sahir M A
Show full item record
240
views
0
downloads
Gearing, Spur., CAD/CAM systems., Computer-aided design.
https://hdl.handle.net/11511/11930
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Computer aided printed circuit board design.
Bulut, Mehmet Mete; Atalar, Abdullah; Köymen, Hayrettin; Department of Electrical and Electronics Engineering (1987)
Computer-aided modelling of rolling
Savcı, Mehmet Nebi; Kaftanoğlu, Bilgin; Department of Mechanical Engineering (1993)
Nonlinear dynamics of spiral bevel gear pair
Önal, Birkan; Ciğeroğlu, Ender; Sarıbay, Zihni Burçay; Department of Mechanical Engineering (2018)
Nonlinear dynamics of a generic spiral bevel gear pair used in high speed, high power gearboxes is studied in this thesis. Different tooth ease-off topographies are generated based on real machine settings. Tooth micro geometries are established in order to obtain profile crowning, lengthwise crowning and flank twist topographies. Details of macro and micro geometry and corresponding real machine settings are given in this study. Path of contact, contact stress, directional rotation radius, load share, unlo...
Design optimization of variable frequency driven three-phase induction motors
Ertan, B; Leblebicioğlu, Mehmet Kemal; Simsir, B; Hamarat, S; Cekic, A; Pirgaip, M (1998-01-01)
An approach to optimize the design of three-phase induction motors for a wide speed range drive is considered. Two operating points in the speed range are taken into consideration. The problem is handled as a constrained optimization problem. An accurate model for the motor in terms of its dimensions has been developed which predicts the motor performance based on about 60 parameters of motor geometry.
Computer Assisted Preliminary Design of Run-Of-River Plants
Alimoglu, Emir; Bozkuş, Zafer; Yanmaz, A. Melih (2014-10-01)
Run-of-river type hydroelectric power plants generate electrical energy by using a certain portion of the available flow in the river. In this study a computer program called MINI-HPD is developed to perform the hydraulic design of run-of-river plants. This program, which runs under the Windows operating system, is developed in C# programming language. MINI-HPD is capable of performing hydraulic design of structural components of diversion weir with lateral intake, overflow spillway, canal, forebay and pens...
Citation Formats
S. M. A. Arıkan, “Computer-aided dynamic modelling of spur gears.,” Ph.D. - Doctoral Program, Middle East Technical University, 1987.
METU IIS - Integrated Information Service open@metu.edu.tr