Optimum design of switching reluctance motors.

1985
Tohumcu, Müjdat
Show full item record
192
views
0
downloads
Reluctance motors
https://hdl.handle.net/11511/11943
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Performance Calculation of SR Motors for Optimum Design and a Washing Machine Application
Ertan, Hulusi Bülent (2008-09-09)
This paper aims to develop an approach for performance calculation of an SR motor, which is suitable for use within mathematical design optimization. For this reason the requirement is to develop procedures, which are both accurate and fast. The procedures adopted here rely on flux-linkage-current-position curves of the motor. A series of tests are carried out on a test motor. The results are compared with estimations from the developed algorithms. It is shown that the current waveform, torque-speed curve, ...
Free bending vibrations of adhesively bonded orthotropic plates with a single lap joint
Yuceoglu, U; Toghi, F; Tekinalp, Ozan (1996-01-01)
This study is concerned with the free bending vibrations of two rectangular orthotropic places connected by an adhesively bonded lap joint. The influence of shear deformation and rotatory, inertia in plates are taken into account in the equations according to the Mindlin plate theory. The effects of both thickness and shear deformations in the thin adhesive layer are included in the formulation. Plates are assumed to have simply supported boundary conditions at two opposite edges. However, any boundary cond...
Optimum geometry for torque ripple minimization of switched reluctance motors
Sahin, F; Ertan, Hulusi Bülent; Leblebicioğlu, Mehmet Kemal (2000-03-01)
For switched reluctance motors, one of the major problems is torque ripple which causes increased undesirable acoustic noise and possibly speed ripple. This paper describes an approach to determine optimum magnetic circuit parameters to minimize low speed torque ripple for such motors. The prediction of torque ripple is based on a set of normalized permeance and force data obtained from numerical field solution for doubly-salient geometries. For that purpose a neural net is trained to extract the data neede...
Prediction of torque and inductance displacement characteristics of asymmetrically slotted variable-reluctance motors using a simplified model for numerical field solution
Ertan, Hulusi Bülent (1999-09-01)
For prediction of static and dynamic performance of doubly-salient motors, it is essential to know their flux linkage-position-excitation characteristics and also the static torque characteristics. At the design stage determination of these characteristics presents difficulties because of highly nonlinear behavior of the magnetic circuit. It is possible to use numerical field solution of the complete motor to obtain this information. This, however, requires expertise on a professional program and may be exp...
Vibration Analysis of a Cracked Beam on an Elastic Foundation
Batihan, Ali Cagri; Kadıoğlu, Fevzi Suat (2016-06-01)
The transverse vibrations of cracked beams with rectangular cross sections resting on Pasternak and generalized elastic foundations are considered. Both the Euler-Bernoulli (EB) and Timoshenko beam (TB) theories are used. The open edge crack is represented as a rotational spring whose compliance is obtained by the fracture mechanics. By applying the compatibility conditions between the beam segments at the crack location and the boundary conditions, the characteristic equations are derived, from which the n...
Citation Formats
M. Tohumcu, “Optimum design of switching reluctance motors.,” Ph.D. - Doctoral Program, Middle East Technical University, 1985.
METU IIS - Integrated Information Service open@metu.edu.tr