Modelling analysis and control of a wind turbine driven self-excited induction generator.

1986
Üctuğ, M. Yıldırım
Show full item record
100
views
0
downloads
Eletcric generators., Turbines., Wind power.
https://hdl.handle.net/11511/11944
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Hybrid excited synchronous generator design and comparison of direct drive wind turbines
Akgemci, Aysel; Keysan, Ozan; Department of Electrical and Electronics Engineering (2019)
Various types of electrical generators are used in wind turbines and there is not an agreement on the best generator type. Although, high speed Doubly Fed Induction Generators (DFIGs) are still the most common generator topology utilized in wind turbine systems, there is a trends toward direct-drive Permanent Magnet Synchronous Generators (PMSGs), as they are more efficient and reliable. However, permanent magnets (PMs) induce uncontrollable voltage due to the fixed flux resulting from PM excitation. Conven...
Investigation of inertial support limits in wind turbines and the effects on the power system stability
Duymaz, Erencan; Keysan, Ozan; Department of Electrical and Electronics Engineering (2019)
In this study, the inertial support implementation is studied for variable speed wind turbines with a full-scale power electronics. To increase the active power as desired, Machine Side Converter is modified with an additional control loop. In the first part of the thesis, active power of the wind turbine is increased to the limits and the maximum achievable active power is found out to be restricted by the wind speed. It is found that the wind turbine can increase its output power by 40% of rated power in ...
Stochastic modelling of wind energy generation
Alişar, İbrahim; Sevaioğlu, Osman; Department of Electrical and Electronics Engineering (2012)
In this thesis work, electricty generation modeling of the wind energy -one type of the renewable energy sources- is studied. The wind energy characteristics and the distribution of wind speed in a specific region is also examined. In addition, the power curves of the wind turbines are introduced and the relationship between the wind speed and wind power is explained. The generation characteristics of the wind turbines from various types of producers are also investigated. In this study, the main wind power...
Performance prediction of darrieus type vertical axis wind turbines using numerical simulations
Gömeç, Fazıl Selçuk; Sert, Cüneyt; Department of Mechanical Engineering (2014)
Flow over Darrieus type straight-bladed vertical axis wind turbines (VAWT) with NACA 0021 blade profile is simulated using ANSYS Fluent software. SST k- turbulence model is used for the two-dimensional, unsteady simulations. Wind speed is taken as 7 m/s and part of the problem domain including the rotating blades is modeled using the sliding mesh technique. Effects of boundary layer mesh parameters, time step and convergence tolerance on the solution accuracy are investigated with carefully designed runs. ...
Modelling and control of a wind energy conversion system consisting of a wind turbine and an inverter-fed induction generator.
Sarıbatır, Behçet Melih; Sezer, M. Erol; Department of Electrical and Electronics Engineering (1985)
Citation Formats
M. Y. Üctuğ, “Modelling analysis and control of a wind turbine driven self-excited induction generator.,” Ph.D. - Doctoral Program, Middle East Technical University, 1986.
METU IIS - Integrated Information Service open@metu.edu.tr