Modelling and control of a wind energy conversion system consisting of a wind turbine and an inverter-fed induction generator.

1985
Sarıbatır, Behçet Melih

Suggestions

Implementation of a vector controlled induction motor drive
Acar, Akın; Ertan, Hulusi Bülent; Department of Electrical and Electronics Engineering (2004)
High dynamic performance, which is obtained from dc motors, became achievable from induction motors with the recent advances in power semiconductors, digital signal processors and development in control techniques. By using field oriented control, torque and flux of the induction motors can be controlled independently as in dc motors. The control performance of field oriented induction motor drive greatly depends on the correct stator flux estimation. In this thesis voltage model is used for the flux estima...
Steady-state and transient performance analyses of a double output induction generator operating at subsynchronous and supersynchronous speeds
Çadırcı, Işık; Ermiş, Muammer; Department of Electrical and Electronics Engineering (1994)
Transient and steady-state modeling and closed-loop control of slip-energy recovery drive.
Akpınar, Eyüp; Ersak, Aydın; Department of Electrical and Electronics Engineering (1991)
Development of a computer program for friction winding system design
Ünal, Fuat Gökhan; Bölükbaşı, Naci; Department of Mining Engineering (2011)
As the trend to deeper mines continues, mine hoists and associated equipment will become more sophisticated, complex, large and expensive. Correct selection of the right type of hoist is imperative. In this vital link between underground and surface, crude estimates of hoist capacity are not good enough, and the mining engineer must design and select the right hoisting system to meet the design specifications and establish the most suitable operating parameters. This study aims to constitute a software mode...
Application of the frequency response methods to the controller design of multivariable induction motor.
Ersak, Aydın; Oral, Özay; Department of Electrical and Electronics Engineering (1979)
Citation Formats
B. M. Sarıbatır, “Modelling and control of a wind energy conversion system consisting of a wind turbine and an inverter-fed induction generator.,” Ph.D. - Doctoral Program, Middle East Technical University, 1985.