Production and characterization of ceramic candle type gas filters

Download
068520.pdf
1997
Yumrukçal, Tolga Ş.
Show full item record
67
views
0
downloads
https://hdl.handle.net/11511/1220
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Production and characterization of aluminum matrix-TIC composites by vacuum sintering
Seymen, Rıza Alparslan; Kalkanlı, Ali; Department of Metallurgical and Materials Engineering (1998)
Production and characterization of yttria stabilized zirconia ceramic blocks for dental applications
Kaplan, Melis; Öztürk, Abdullah; Park, Jongee; Department of Metallurgical and Materials Engineering (2017)
Dense zirconia ceramic blocks were produced by pressureless sintering at temperatures down to 1350- 1450 oC for dental applications. The effect(s) of integration of cold isostatic pressing (CIP’ing) to the production procedure of the zirconia blocks was researched by applying 80, 100, and 150 MPa isostatic pressure. The effect of color infiltration solutions (NiCl2 and MoCl3 solutions) on color and low temperature degradation properties of zirconia was investigated. Tetragonal to monoclinic phase transforma...
Production and Characterization of Yttria Stabilized Zirconia Ceramic Blocks for Dental Applications
Kaplan, Melis; Park, Jongee; Öztürk, Abdullah (null; 2016-12-01)
Production and characterization of porous titanium alloys
Esen, Ziya; Bor, Şakir; Department of Metallurgical and Materials Engineering (2007)
In the present study, production of titanium and Ti6Al4V alloy foams has been investigated using powder metallurgical “space holder technique” in which magnesium powder were utilized to generate porosities in the range 30 to 90 vol. %. Also, sintering of titanium and Ti-6Al-4V alloy powders in loose and compacted condition at various temperatures (850-1250oC) and compaction pressures (120-1125 MPa), respectively, were investigated to elucidate the structure and mechanical properties of the porous cell walls...
Production and characterization of nano silver oxide for silver zinc batteries
Yurtseven, Özüm Öyküm; Aydınol, Mehmet Kadri; Nalbant Esentürk, Emren; Department of Micro and Nanotechnology (2013)
Rechargeable silver-zinc batteries have aroused interest and find various area of usage depending on their notably technical advantages over other battery systems including their high specific energy and high recharge efficiency. In this battery chemistry, silver oxide and metallic zinc are used as the positive and negative active materials respectively. Chemically stabilized particles with large surface areas are needed to reach high discharge rates for battery applications. The use of nanoparticles as ele...
Citation Formats
T. Ş. Yumrukçal, “Production and characterization of ceramic candle type gas filters,” Middle East Technical University, 1997.
METU IIS - Integrated Information Service open@metu.edu.tr