The effect of anneling temperature and time on mechanical properties of crosslinked polyethlene film

Download

068462.pdf

Date

1997

Author

Banat, Raid M. I.

Metadata

Show full item record

Item Usage Stats

173
views

167
downloads

URI

https://hdl.handle.net/11511/8984

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

The effect of SN content and isothermal transformation temperature on the mechanical properties of austempered ductile cast iron Özcan, Alper; Atala, Haluk; Department of Metallurgical and Materials Engineering (2003) In this study the effects of Sn content and isothermal transformation temperature on the ultimate tensile strength (UTS), elongation and hardness of austempered ductile cast iron (ADI) was investigated. To determine the possible effect of Sn on these properties the Sn content of standard GGG30, GGG40 and GGG50 materials were taken as reference, whose chemical compositions vary from 0,016 to 0,050% in terms of Sn. However the Sn content was increased to a maximum of 0,26% for investigating the effect of Sn o...
The effect of axial conduction on heat transfer in a liquid microchannel flow Cole, Kevin D.; Cetin, Barbaros (2011-05-01) Analysis is presented for conjugate heat transfer in a parallel-plate microchannel. Axial conduction in the fluid and in the adjacent wall are included. The fluid is a constant property liquid with a fully-developed velocity distribution. The microchannel is heated by a uniform heat flux applied to the outside of the channel wall. The analytic solution is given in the form of integrals by the method of Green's functions. Quadrature is used to obtain numerical results for the local and average Nusselt number...
The effect of support and solvent type on the performance of composite membranes Şener, Tansel; Gürkan, Türker; Yılmaz, Levent; Department of Chemical Engineering (2001)
THE EFFECT OF COARSE 2ND PHASE PARTICLES ON FATIGUE-CRACK PROPAGATION OF AN AL-ZN-MG-CU ALLOY Gürbüz, Rıza (Elsevier BV, 1994-06-01)
The Effect of austempering process parameters on the mechanical properties of ductile cast iron Keleş, Evin; Atala, Haluk; Department of Metallurgical and Materials Engineering (2001)

Citation Formats

R. M. I. Banat, “The effect of anneling temperature and time on mechanical properties of crosslinked polyethlene film,” Middle East Technical University, 1997.