Model predictive control of the chlorination stage in a pulp bleaching plant

Download
116383.pdf
2001
Uğur, Cenk
Show full item record
118
views
0
downloads
https://hdl.handle.net/11511/12303
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Model study of negative skin friction of pile groups in medium dense granular soils
Sönmez, D Devrim; Ergun, Ufuk; Department of Civil Engineering (1994)
Model Predictive Control for a PUC5 based Dual Output Active Rectifier
Makhamreh, Hamza; Trabelsi, Mohamed; Kukrer, Osman; Abu-Rub, Haitham (2019-01-01)
In this paper, an effective finite-control-set model predictive controller (FCS-MPC) is proposed for an active dual output rectifier. The topology under study is a 5-level packed U cells (PUC5) rectifier. The optimized cost function is designed based on the capacitors' voltages and current errors. The Capacitors' reference voltages and the peak value of the reference grid current are used to normalize the errors within the cost function. The peak value of the current reference is generated by a PI controlle...
Model predictive control studies on a cascade temperature control loop
Genç, Ayten; Özgen, Canan; Department of Chemical Engineering (1991)
Model Predictive control(MPC)performance for controlling reaction systems
Aşar, Işık; Özgen, Canan; Department of Chemical Engineering (2004)
In this study, the performance of the Model Predictive Controller (MPC) algorithm is investigated in two different reaction systems. The first case is a saponification reaction system where ethyl acetate reacts with sodium hydroxide to produce sodium acetate and ethanol in a CSTR. In the reactor, temperature and sodium acetate concentration are controlled by manipulating the flow rates of ethyl acetate and cooling water. The model of the reactor is developed considering first principal models. The experimen...
Model-based evaluation of the control strategies of a hand rehabilitation robot based on motor learning principles
Yağmur, Onur Can; Turgut, Ali Emre; Arıkan, Kutluk Bilge; Department of Mechanical Engineering (2022-1-28)
Stroke is an important health problem that occurs after blockage or bleeding in the vessels feeding the brain. It is one of the leading causes of death in the world. Patients with surviving hemiplegia often have a loss or decrease in voluntary movement of the right or left side of the body. The disease reduces the quality of life of patients with its spasticity and limits their independence; This situation poses an important problem for patients, their relatives, and the whole society. This thesis aims to d...
Citation Formats
C. Uğur, “Model predictive control of the chlorination stage in a pulp bleaching plant,” Middle East Technical University, 2001.
METU IIS - Integrated Information Service open@metu.edu.tr