Optimum design of plates under dynamic conditions

Download

143376.pdf

Date

2003

Author

Kılıç, Orkun

Metadata

Show full item record

Item Usage Stats

120
views

0
downloads

Subject Keywords

Finite element method

URI

https://hdl.handle.net/11511/13401

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Technological characteristics of abrick masonry structure and their relationship with the structural behaviour / Aktaş, Yasemin Didem; Türer, Ahmet; Department of Archaeometry (2006) The aim of this study is to investigate the physical and mechanical properties of construction materials in relation with the structural behaviour of a historic structure. Within this framework, the brick masonry superstructure of Tahir ile Zuhre Mescidi, a XIIIth century Seljuk monument in Konya was selected as case study. The study started with the determination of the basic physical (bulk density, effective porosity, water absorption capacity), mechanical (modulus of elasticity, uniaxial compressive stre...
Nonlinear finite element analysis of tunnels Yıldırım, Musa; Yılmaz, Çetin; Department of Civil Engineering (1994)
Rate effect parameters for oper-ended pipe piles in sand Oud, Mohamed; Birand, Altay; Department of Civil Engineering (1991)
Investigation of a damaged historical mosque with finite element analysis Köseoğlu, G. Çağıl; Canbay, Erdem; Department of Civil Engineering (2011) Historic structures form a very important part of our cultural heritage and should be well protected. Therefore, full comprehension of the structural behavior of historic structures is of prior importance. A seriously damaged single domed mosque of 16th century Classical Ottoman Architecture was investigated in this study. Serious damages have been observed at various structural elements including the dome and the structural masonry walls, recently leading the structure's closure to service. The main object...
Nonlinear analysis of shells of revolution Odeh, Ghassan M. H.; Akkaş, Nuri; Polat, Uğur; Department of Civil Engineering (1998)

Citation Formats

O. Kılıç, “Optimum design of plates under dynamic conditions ,” M.S. - Master of Science, Middle East Technical University, 2003.