Pressure drop in helically roughened pipes /

Date

1969

Author

Akon, Engin

Metadata

Show full item record

Item Usage Stats

129
views

0
downloads

URI

https://hdl.handle.net/11511/14660

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Pressure drop during the flow of two-phase mixtures in a heated horizontal channel. Yurt, S. Serdar; Department of Mechanical Engineering (1985)
Pressure Loss at the Bit While Drilling with Foam Ozbayoglu, E. M. (Informa UK Limited, 2009-01-01) Foam is one of the most frequently used drilling fluids at underbalanced drilling operations. As foam flows, due to the pressure drop, a volumetric expansion is observed, which causes the foam quality to increase in the same direction with flow. Flow of foams through circular pipes and annular geometries are well studied. Interestingly, although one of the major sources of pressure drop is at the bit, there have been few studies of this subject for foams. Many drilling parameters including hole cleaning cap...
Pressure distribution and downpull force on vertical gate lips Telci, İlker Tonguç; Aydın, İsmail; Department of Civil Engineering (2002)
Pressure, gas ratio and operation voltage optimization of a helium-neon laser Bilgili, Hulusi Birol; Esendemir, Akif; Department of Physics (2005) Aim of this thesis is to investigate the optimum working parameters of a helium-neon laser. Partial pressure ratios, total pressures of the gases and voltage-current characteristics were studied. The analysis of the results includes the minor factors (impurity, volume, etc.) and their effects to main parameters (laser power, voltage, current). Tables, which were formed by measured optical parameters as wavelength and power, converted to graphs and from these graphs optimal working conditions for the laser a...
Stress behavioursof viscoelastic flowaround square cylinder Tezel Tanrısever, Güler Bengüsu; Yapıcı, Kerim; Uludağ, Yusuf (2019-06-01) In this study, it is aimed the numerically investigation of the flow of liner PTT (Phan-Thien-Tanner) fluid, which is a viscoelastic fluid model over limited square obstacle by finite volume method. The finite volume method has been used for simultaneous solution of continuity, momentum and fluid model equations with appropriate boundary conditions. The effects of the inertia in terms of Reynolds number, Re, (0 < Re < 20) and the of elasticity in terms of Weissenberg number, We, (1 < We < 15) of PTT flow ...

Citation Formats

E. Akon, “Pressure drop in helically roughened pipes /,” Middle East Technical University, 1969.