Pressure drop during the flow of two-phase mixtures in a heated horizontal channel.

1985
Yurt, S. Serdar

Suggestions

Pressure drop in helically roughened pipes /
Akon, Engin; Department of Chemical Engineering (1969)
Pressure drop due to entrance region for a turbulent flow in closed conduits
Tigrek, Sahnaz; Denli Tokyay, Nuray; Department of Civil Engineering (1990)
Pressure Loss at the Bit While Drilling with Foam
Ozbayoglu, E. M. (Informa UK Limited, 2009-01-01)
Foam is one of the most frequently used drilling fluids at underbalanced drilling operations. As foam flows, due to the pressure drop, a volumetric expansion is observed, which causes the foam quality to increase in the same direction with flow. Flow of foams through circular pipes and annular geometries are well studied. Interestingly, although one of the major sources of pressure drop is at the bit, there have been few studies of this subject for foams. Many drilling parameters including hole cleaning cap...
Pressure Dependence of Molar Volume near the Melting Point in Benzene
Yurtseven, Hasan Hamit (Tsinghua University Press, 2007-10-01)
The pressure dependence of the molar volume was at constant temperatures close to the melting point in benzene. The molar volume of benzene was calculated using experimental data for the thermal expansivity for constant temperatures of 25°C, 28.5°C, 40°C, and 51°C at various pressures for both the solid and liquid phases. The predictions are in good agreement with the observed volumes in both the solid and liquid phases of benzene. The predicted values of the molar volume for a constant temperature of 28.5°...
Pressure distribution and downpull force on vertical gate lips
Telci, İlker Tonguç; Aydın, İsmail; Department of Civil Engineering (2002)
Citation Formats
S. S. Yurt, “Pressure drop during the flow of two-phase mixtures in a heated horizontal channel.,” Middle East Technical University, 1985.