Performance of a distillation column packed with circular discs. /

1969
Özbelge, H. Önder
Show full item record
71
views
0
downloads
https://hdl.handle.net/11511/14670
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Performance of an alkaline fuel cell with single or double layer electrodes
Han, E; Eroğlu, İnci; Turker, L (2000-02-01)
In the present research, the improvement of an alkaline fuel cell performance by changing the electrode structure and manufacturing method has been achieved by employing multilayer, Teflon-bonded gas diffusion type electrodes which were prepared by the rolling method. Active carbon or carbon black was used as the support material, platinum as the catalyst and nickel screen as the backing material. Double layer electrodes possessed the active and the diffusion layers on the backing layer. However, the single...
Performance of a flat grooved heat pipe with a localized heat load
Sezmen, Ramazan Aykut; Çetin, Barbaros ; Dursunkaya, Zafer (2021-05-18)
Heat pipes are phase change heat transfer devices used in wide range of heat transport applications due to their high thermal transport capacities with low temperature differences. Heat pipes are especially preferred for electronic cooling applications and aerospace avionics to satisfy high heat transfer rate requirements. In this study, heat transfer and phase change mechanisms of working fluid are investigated and modeled using a 3-D thermal resistance network for multichannel flat grooved heat pipes. Fir...
Performance of a moment resisting beam-column connection for precast concrete construction
Baran, Eray; BARAN, MEHMET; Kurtoglu, Metin; Torra-Bilal, Ines (2021-11-01)
Seismic performance of a specific type of moment resisting precast concrete beam-column connection was investigated through reversed cyclic load tests. Structural steel components were incorporated with precast concrete beam and column elements in the experiments to provide a ductile moment resisting connection. Additionally, nonlinear finite element analysis (FEA) of typical monolithic and precast connections was performed to investigate the performance and failure modes of these connections. Concrete Dama...
Performance of Beam-to-Column Connection of a Well-Detailed RC Moment Frame Building under Pseudodynamic Loading
Unal, Mehmet; Burak Bakır, Burcu (American Society of Civil Engineers (ASCE), 2013-06-01)
The performance of RC frame members under earthquake loading may differ significantly from that of the frame. Even if the story drifts are not significant, a collapse mechanism may be observed because of extensive deformations in the beams, columns, or joints. Therefore, the seismic performance of each member should be investigated independently from that of the frame. In this experimental research, the seismic performance of one exterior and one interior beam-to-column connection region of a one-half-scale...
Performance of rectangular fins on a vertical base in free convection heat transfer
Yazıcıoğlu, Burak; Yüncü, Hafit; Department of Mechanical Engineering (2005)
The steady-state natural convection heat transfer from vertical rectangular fins extending perpendicularly from vertical rectangular base was investigated experimentally. The effects of geometric parameters and base-to-ambient temperature difference on the heat transfer performance of fin arrays were observed and the optimum fin separation values were determined. Two similar experimental set-ups were employed during experiments in order to take measurements from 30 different fin configurations having fin le...
Citation Formats
H. Ö. Özbelge, “Performance of a distillation column packed with circular discs. /,” Middle East Technical University, 1969.
METU IIS - Integrated Information Service open@metu.edu.tr