Heat transfer in perforated tray distillation columns /

1970
Gündüz, Güngör
Show full item record
64
views
0
downloads
https://hdl.handle.net/11511/14681
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Heat transfer studies in draft tube reactor /
Kocakuşak, Oktay; Department of Chemical Engineering (1971)
Heat removal from a large scale warm water storage
Kayserilioğlu, Yavuz Selim; Oskay, Rüknettin; Department of Mechanical Engineering (2004)
A preliminary experimental study was performed in order to investigate the charging and heat removal characteristics of a sensible heat storage. Two sets of experiments were performed at two aspect ratios. Heat removal processes of these two sets were different while the charging processes were similar. In the first set of experiments, after the charging of the storage unit with relatively warm water was complete, heat removal process was started with simple heat exchangers from different elevations within ...
Heat transfer in ultra-high temperature advanced ceramics under high enthalpy arc-jet conditions
Cecere, Anselmo; Savino, Raffaele; Allouis, Christophe Gerard; Monteverde, Frederic (2015-12-01)
Aim of this work is to analyze the response of an ultra-high temperature ceramic at typical heat flux conditions of thermal protection systems of a re-entry spacecraft. In particular, a ZrB2-SiC based ultra-high temperature advanced ceramic sharp leading edge demonstrator (1 mm nominal radius of curvature) was manufactured and tested in a non-equilibrium high enthalpy supersonic airflow, 20 MJ/kg of peak total enthalpy, by using an arc-jet ground facility. The surface temperature of the leading edge was mon...
Heat transfer enhancement by silver nanowire suspensions in microchannel heat sinks
SIMSEK, Eylul; Coskun, Sahin; OKUTUCU-OZYURT, Tuba; Ünalan, Hüsnü Emrah (2018-01-01)
Convection heat transfer and pressure drop characteristics of water based silver nanowire suspensions flowing through CMOS compatible monolithic microchannel heat sinks are investigated experimentally. Three different rectangular channels of 200 mu m x 50 mu m, 100 mu m x 50 mu m and 70 mu m x 50 mu m cross sectional area are used during the experiments. The stability of the silver nanofluids is established by the added polyvinylpyrrolidone (PVP) as the surfactant. To investigate the potential heat transfer...
Heat and mass transfer during frying
Şahin, Serpil; Bayındırlı, Levent; Bayındırlı, Alev; Department of Food Engineering (1997)
Citation Formats
G. Gündüz, “Heat transfer in perforated tray distillation columns /,” Middle East Technical University, 1970.
METU IIS - Integrated Information Service open@metu.edu.tr