A study of nickel diffusion coating on a plain carbon steel

Download
076001.pdf
1998
Yanar, N. Meltem
Show full item record
125
views
0
downloads
https://hdl.handle.net/11511/1485
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

A study of nickel diffusion coating on plain carbon steel substrates
Ögel, Bilgehan (1998-09-04)
A Study of IGBT Rupture Phenomenon in Medium Frequency Resistance Welding Machine
Saleem, Jawad; Majid, Abdul; Haller, Stefan; Bertilsson, Kent (2011-09-10)
Inverter drive resistance spot welding machines are becoming a good choice of welding because of the increased machine efficiency and output power. The DC link capacitors in spot welding equipment store a large amount of energy. In case of any failure, the IGBT in the inverter has a risk of exhibiting a violent rupture. This rupture can damage the converter, drive down time and personal injury which may lead to the machinery certification problems. IGBT failure detection and solution for protection of these...
A comparative study on the nonlinear behavior of chevron and suspended zipper braced steel frames
Özçelik, Ahmet Yiğit; Sarıtaş, Afşin; Department of Civil Engineering (2010)
Chevron braced steel frames require large beams to redistribute the unbalanced vertical forces exerted on the beams after brace buckling. A new frame configuration similar to chevron brace was proposed in literature, where zipper columns were attached between mid-spans of the beams from second to top story. During severe ground motion, the unbalanced vertical forces caused by buckling of lower story braces are in this case redistributed to the upper story braces by these zipper columns. Consequently, all st...
A Study of nickel diffusion coating on stainless steel substrates and its effect on stress corrosion cracking
Atay, Işık; Ögel, Bilgehan; Department of Metallurgical and Materials Engineering (1997)
A study on the effects of different gums on dielectric properties and quality of breads baked in infrared-microwave combination oven
Keskin, Semin Ozge; Şümnü, Servet Gülüm; Şahin, Serpil (Springer Science and Business Media LLC, 2007-01-01)
In this study, the effects of different gums on dielectric properties of doughs and breads baked in infrared-microwave combination oven were investigated. In addition, the quality parameters of breads formulated with different gums baked in infrared-microwave combination oven were determined. The gums used were xanthan, guar, xanthan-guar blend and kappa-carrageenan. The gums were added to the formulation at 0.5% concentration. The dielectric properties and quality parameters of breads baked in infrared-mic...
Citation Formats
N. M. Yanar, “A study of nickel diffusion coating on a plain carbon steel,” Middle East Technical University, 1998.
METU IIS - Integrated Information Service open@metu.edu.tr