A study of nickel diffusion coating on plain carbon steel substrates

Date

1998-09-04

Author

Ögel, Bilgehan

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

137
views

0
downloads

URI

https://hdl.handle.net/11511/54027

Collections

Department of Metallurgical and Materials Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

A study of nickel diffusion coating on a plain carbon steel Yanar, N. Meltem; Ögel, Bilgehan; Department of Metallurgical and Materials Engineering (1998)
A Study of nickel diffusion coating on stainless steel substrates and its effect on stress corrosion cracking Atay, Işık; Ögel, Bilgehan; Department of Metallurgical and Materials Engineering (1997)
A Study of steam assisted gravity drainage performance in the presence of non-condensable gases Canbolat, Serhat; Akın, Serhat; Department of Petroleum and Natural Gas Engineering (2001)
A comparative study on the nonlinear behavior of chevron and suspended zipper braced steel frames Özçelik, Ahmet Yiğit; Sarıtaş, Afşin; Department of Civil Engineering (2010) Chevron braced steel frames require large beams to redistribute the unbalanced vertical forces exerted on the beams after brace buckling. A new frame configuration similar to chevron brace was proposed in literature, where zipper columns were attached between mid-spans of the beams from second to top story. During severe ground motion, the unbalanced vertical forces caused by buckling of lower story braces are in this case redistributed to the upper story braces by these zipper columns. Consequently, all st...
A numerical study on response factors for steel plate shear wall systems Kurban, Can Ozan; Topkaya, Cem; Department of Civil Engineering (2009) Design recommendations for steel plate shear wall (SPSW) systems have recently been introduced into seismic provisions for steel buildings. Response modification, overstrength, and displacement amplification factors for SPSW systems presented in the design codes were based on professional experience and judgment. A numerical study has been undertaken to evaluate these factors for SPSW systems. Forty four unstiffened SPSWs possessing different geometrical characteristics were designed based on the recommenda...

Citation Formats

B. Ögel, “A study of nickel diffusion coating on plain carbon steel substrates,” 1998, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/54027.