A study on dam instrumentation retrofitting: gökçekaya dam

Download
2008
Arı, Onur
Multi-purpose project requirements lead to construction of large dams. In order to maintain the desired safety level of such dams, comprehensive inspections based on use of a number of precise instruments are needed. The ideal dam instrumentation system should provide time-dependent information about critical parameters so that possible future behavior of the structure can be predicted. New dams are normally equipped with adequate instrumentation systems. Most of the existing dams, however, do not have adequate instruments or current instrumentation systems may not be in good condition. By implementing the modern equipment to existing dams, the uncertainty associated with the impacts of aging or unexpected severe external events will be reduced and possible remedial measures can be taken accordingly. This study summarizes the major causes of dam failures and introduces the instruments to be used to monitor the key parameters of a dam. The concept of the instrument retrofitting to an unmonitored dam is highlighted through a case study. A sample system is proposed for Gökçekaya Dam, with reference to an investigation of the current condition of the structure. The deficiencies observed during a site visit are listed and the corresponding rehabilitative repair measures are suggested. Finally, different alternatives of a new instrumentation system are introduced and compared in terms of technical and economical aspects.

Suggestions

Stabilization of expansive soils using waste marble dust
Başer, Onur; Çokça, Erdal; Department of Civil Engineering (2009)
Expansive soils occurring in arid and semi-arid climate regions of the world cause serious problems on civil engineering structures. Such soils swell when given an access to water and shrink when they dry out. Several attempts are being made to control the swell-shrink behavior of these soils. Soil stabilization using chemical admixtures is the oldest and most widespread method of ground improvement. In this study, waste limestone dust and waste dolomitic marble dust, by-products of marble industry, were us...
Analytical investigation of aashto lrfd response modification factors and seismic performance levels of circular bridge columns
Erdem, Arda; Caner, Alp; Department of Civil Engineering (2010)
Current seismic design approach of bridge structures can be categorized into two distinctive methods: (i) force based and (ii) performance based. AASHTO LRFD seismic design specification is a typical example of force based design approach especially used in Turkey. Three different importance categories are presented as “Critical Bridges”, “Essential Bridges” and “Other Bridges” in AASHTO LRFD. These classifications are mainly based on the serviceability requirement of bridges after a design earthquake. The ...
Bonding efficiency of roller compacted concrete with different bedding mixes
Özcan, Sinan; Yaman, İsmail Özgür; Department of Civil Engineering (2008)
Roller Compacted Concrete (RCC) has rapidly evolved from a concept to a material and a process which is used throughout the world for faster and more economical construction of dams. Currently, there are more than 250 RCC dams, completed or under construction, in the world. On the other hand, currently, there are only two RCC dams completed (Suçatı and Cindere Dams) and two under construction (Beydağ and Çine Dam) in Turkey. RCC dams are constructed in a series of compacted layers usually 30 cm in thickness...
An integrated seismic hazard framework for liquefaction triggering assessment of earthfill dams' foundation soils
Ünsal Oral, Sevinç; Çetin, Kemal Önder; Department of Civil Engineering (2009)
Within the confines of this study, seismic soil liquefaction triggering potential of a dam foundation is assessed within an integrated probabilistic seismic hazard assessment framework. More specifically, the scheme presented hereby directly integrates effective stress-based seismic soil liquefaction triggering assessment with seismic hazard analysis framework, supported by an illustrative case. The proposed methodology successively, i) processes the discrete stages of probabilistic seismic hazard workflow ...
Developing a methodology for the design of water distribution networks using genetic algorithm
Gençoğlu, Gençer; Merzi, Nuri; Department of Civil Engineering (2007)
The realization of planning, design, construction, operation and maintenance of water supply systems pictures one of the largest infrastructure projects of municipalities; water distribution networks should be designed very meticulously. Genetic algorithm is an optimization method that is based on natural evolution and is used for the optimization of water distribution networks. Genetic algorithm is comprised of operators and the operators affect the performance of the algorithm. Although these operators ar...
Citation Formats
O. Arı, “A study on dam instrumentation retrofitting: gökçekaya dam,” M.S. - Master of Science, Middle East Technical University, 2008.