Virtual modelling, planning and production of parts of an industrial robots

Download

082781.pdf

Date

1999

Author

Toker, Şükrü Bülent

Metadata

Show full item record

Item Usage Stats

171
views

0
downloads

URI

https://hdl.handle.net/11511/1965

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Virtual design studios, organizational aspects and their role in design collaboration Kara, Cem; Baykan, Can; Department of Building Sciences (2001)
Numerical Modelling and Experimental Analysis of Vibratory and Acoustics Behaviours of a Special Design Squirrel-Cage Three-Phase Asynchronous Machine Ionescu, R. M.; Negoita, A.; N'Diaye, A.; Torregrossa, D.; Djerdir, A.; Miraoui, A.; Scutaru, Gh. (2011-09-10) The paper presents a comparison between the obtained results from testing a special design 5 kW squirrel-cage three-phase asynchronous machine and the numerical model of the same machine, simulated under the FLUX2D Finite Element Software. The aim is to validate the numerical model in the loaded and unloaded cases. The resulting model will be used for further research into the vibratory behaviour and noise of the motor. In this paper, an experimental approach is used to show the influence of load on motor v...
3D finite element modeling of surface excavation and loading over existing tunnels Kaçar, Onur; Erol, Orhan; Department of Civil Engineering (2007) The influence of the surface excavation and loading on the existing tunnels has been investigated using a Finite Element Method program, Plaxis 3D Tunnel. A parametric study has been carried out where the parameters were the depth of the surface excavation, the eccentricity of the excavation with respect to the tunnel axis, the height of the embankment fill and the stiffness of the soil. It is found that, excavations over the existing tunnels have a negative effect on the tunnel lining capacity since the un...
Virtual Space as a Public Sphere Rethinking the Political and Professional Agenda of Spatial Planning and Design Barlas, Mehmet Adnan; Çalışkan, Olgu (2006-12-01)
Numerical Modeling of Infilled Reinforced Concrete Frame and Its Verification Akansel, Vesile Hatun; Yakut, Ahmet (null; 2018-04-11)

Citation Formats

Ş. B. Toker, “Virtual modelling, planning and production of parts of an industrial robots,” Middle East Technical University, 1999.