Implementation of differential relay by using digital signal processor

Download
075861.pdf
1998
Çakır, Cengiz
Show full item record
83
views
0
downloads
https://hdl.handle.net/11511/2079
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Implementation of Robot Formation Control and Navigation Using Real Time Panel Method
Merheb, Abdel Razzak; Atas, Yunus; Gazi, Veysel; Sezer Uzol, Nilay (null; 2010-10-22)
Implementation of ball-center spring analogy mesh deformation technique with CFD design optimization
Yang, Yosheph; Özgen, Serkan (2015-01-01)
© 2015, American Institute of Aeronautics and Astronautics Inc, AIAA. All rights reserved.Mesh deformation technique plays an important role in several numerical simulations and applications including design optimization. This paper aims to implement the developed unstructured mesh deformation technique for CFD Design Optimization around 2-D Airfoils. During the optimization procedure, the newly deformed mesh is generated by using the updated Ball-Center Spring analogy mesh deformation technique. The compar...
Implementation of direction finding with frequency diverse array
Turhaner, Arsen; Demir, Şimşek; Department of Electrical and Electronics Engineering (2017)
Frequency Diverse Array (FDA) is a recent concept with lots of advantages that are emerged for the radar applications. In order to implement FDA practically, Linear Frequency Modulation (LFM) based FDA is recently offered. A tunable oscillator with delay lines is enough for the implementation. This novel design caught up the gaps of the FDA for a cheap implementation. In order to implement radar, there should be lots of features in the signal processing as well as in the RF front-end. One of the important f...
Implementation of sensorless vector control drive with current position estimation
Filci, Tayfun; Ertan, Hulusi Bülent; Department of Electrical and Electronics Engineering (2016)
In this thesis, an algorithm will be developed and implemented online for the estimation of rotor position from the rotor slot harmonics in stator currents. Experiments will be done on an inverter driven induction motor hardware, and the performance of the position detection algorithm will be evaluated in comparison with commercial encoder outputs.
Implementation of noise filtering algorithm for automated pressure transient analysis
Coşar, Doğuhan; Sınayuç, Çağlar; Department of Petroleum and Natural Gas Engineering (2022-9-2)
In order to estimate reservoir parameters such as permeability and skin factor, well tests are performed. Pressures are recorded periodically during these tests. These parameters are crucial in predicting the amount of oil or gas that can be produced. The analysis of pressure changes provide information about the reservoir characteristics and its ability to produce hydrocarbons at a certain amount of time. Three different cases of drawdown tests are analyzed. Derivative curves are plotted using data poin...
Citation Formats
C. Çakır, “Implementation of differential relay by using digital signal processor,” Middle East Technical University, 1998.
METU IIS - Integrated Information Service open@metu.edu.tr