Hydrogen bonding in polyanilines

1994-12
Bahçeci, S.
Toppare, Levent Kamil
Yurtsever, E.
Show full item record
408
views
0
downloads
Hydrogen bonding between poly(bisphenol A carbonate) (PC) and polyaniline (PAn) is analyzed using semi-empirical quantum methodology. Fully optimized AM1 molecular orbital calculations are reported for various aniline structures (monomer, dimer and trimer), the monomer of the PC and the hydrogen-bonded model of PAn-PC oligomer.
Polyanilines, Hydrogen bonding
https://hdl.handle.net/11511/28332
Synthetic Metals
Department of Chemistry, Article

Suggestions

Direct synthesis of hydrogen storage alloys from their oxides
Tan, Serdar; Öztürk, Tayfur; Aydınol, Mehmet Kadri; Department of Metallurgical and Materials Engineering (2011)
The aim of this study is the synthesis of hydrogen storage compounds by electrodeoxidation technique which offers an inexpensive and rapid route to synthesize compounds from oxide mixtures. Within the scope of this study, two hydrogen storage compounds, FeTi and Mg2Ni, are aimed to be produced by this technique. In the first part, effect of sintering conditions on synthesis of FeTi was studied. For this purpose, oxide pellets made out of Fe2O3-TiO2 powders were sintered at temperatures between 900 °C – 1300...
Hydrogen storage capability of carbon nanotube Be@C-120
Turker, L; Eroglu, I; Yucel, M; Gündüz, Ufuk (2004-12-01)
PM3 (RHF) type semiempirical quantum chemical calculations have been carried out on (nH(2) + Be)@C-120 Systems where C-120 is a capped tube and n less than or equal to 15. The results indicate that all these systems are stable but endothermic in nature. (7H(2) + Be)@C-120 system has the lowest heat of formation value. (C) 2004 International Association for Hydrogen Energy. Published by Elsevier Ltd. All rights reserved.
Multiscale Modeling of the Morphology and Properties of Segmented Silicone-Urea Copolymers
Yıldırım, Erol; Yurtsever, Ersin; Yilgor, Iskender; Yilgor, Emel (Springer Science and Business Media LLC, 2011-9-9)
Molecular dynamics and mesoscale dynamics simulation techniques were used to investigate the effect of hydrogen bonding on the microphase separation, morphology and various physicochemical properties of segmented silicone-urea copolymers. Model silicone-urea copolymers investigated were based on the stoichiometric combinations of alpha,omega-aminopropyl terminated polydimethylsiloxane (PDMS) oligomers with number average molecular weights ranging from 700 to 15,000 g/mole and bis(4-isocyanatocyclohexyl)meth...
Chemical preparation of the binary compounds of CaO-Al2O3 system by combustion synthesis
Uysal, O; Tas, AC (1997-05-07)
The binary compounds (C(3)A: Ca3Al2O6, C(12)A(7): Ca12Al14O33, CA: CaAl2O4, CA(2): CaAl4O7 and CA(6): CaAl12O19) of CaO-Al2O3 system have been synthesized as high compound-purity ceramic powders by using the Combustion Synthesis (CS) method. Materials characterization of the above-mentioned phases were performed by powder XRD, FTIR, SEM and EDXS. It has hereby been shown that by using this synthesis procedure it would be possible to manufacture high-purity ceramic powders of CA, CA(2), and C(12)A(7) at 850 ...
Sorption properties of synthetic ferrierite
Karsli, H; Çulfaz, Ali; Yucel, H (2003-05-01)
Limiting sorption volumes of the hydrogen form of a synthetic ferrierite sample were determined for sorbates-water, methanol, propane, hexane, and o-, m-, p-xylenes-at 298 K and at a relative pressure of P/P-o= 0.5 using a gravimetric sorption apparatus. Methanol, which has a kinetic diameter significantly smaller than the pore dimensions, was sorbed relatively rapidly and by the greatest amount. The sorption rates of other sorbates were very slow and for some it took several days for equilibrium to be esta...
Citation Formats
S. Bahçeci, L. K. Toppare, and E. Yurtsever, “Hydrogen bonding in polyanilines,” Synthetic Metals, pp. 57–60, 1994, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/28332.
METU IIS - Integrated Information Service open@metu.edu.tr