Inlet flow distortions on an axial flow fan

Download
2000
Böge, Ali Cem

Suggestions

Inlet flow distortions on an axial flow fan.
Gürün, Akif Murat; Eralp, Cahit O.; Albayrak, Kahraman; Department of Mechanical Engineering (2002)
Input torque balancing with a helical spring
Gökışık, Feza; Tümer, S. Turgut; Department of Mechanical Engineering (1997)
Axial flux generator with novel flat wire for direct-drive wind turbines
Çakal, Gökhan; Keysan, Ozan (2021-01-01)
With the increased demand for renewable energy resources, the direct-drive wind turbine generators have been studied intensely in the last few decades. One megawatt direct-drive axial flux permanent magnet generator is presented. The novelty in this design is that instead of conventional stranded wires, the windings of the generator are manufactured from a conductor sheet by cutting and bending processes. This creates critical advantages of superior current ratings, ease of manufacturing, and reduced struct...
AXIAL DISPERSION OF LIQUID IN MOBILE-BED CONTACTING
Uysal, B.Z; Özilgen, M. (Informa UK Limited, 1989-7)
Axial dispersion of liquid in Mobile-Bed Contacting (MBC) was investigated employing transient-response technique with impulse input of NaCI tracer. Experiments were performed in a 0.195 m ID column. Three different packing diameters (15, 19.5 and 32 mm) and three different static bed heights (0.1, 0.195 and 0.3 m) were used. Gas flow rate was varied between 3.02 and 4.05 kg/m2/s and liquid flow rate from 2.4 to 10.4 kg/m2/s. Transfer function analysis of data yielded that Peclet number was practically ind...
Axial compressor and turbine stage design using through-flow and blade-to-blade codes
Gönç, L. Oktay; Üçer, Ahmet Ş.; Department of Mechanical Engineering (1998)
Citation Formats
A. C. Böge, “Inlet flow distortions on an axial flow fan,” Middle East Technical University, 2000.