Prefabrication of building elements external wall panels, colums and slabs in concrete.

Ashfaq, Ahmad


Prefabricated lightweight concrete exterior wall panel for office buildings.
Altınyuva, Sibel; Department of Architecture (1976)
Prefabrication of Dwellings feasibility in developing countries on a system analysis of costs with special emphasis on Turkey.
Arditti, David; Department of Civil Engineering (1968)
Retrofit of Non-Ductile RC Frames with Precast Concrete (PC) Wall Panels
BARAN, MEHMET; Tankut, Tugrul (2011-12-01)
An economic, structurally effective and practically applicable strengthening method had been developed for reinforced concrete (RC) framed buildings. This study presents the test results on strengthening of deficient RC frames by using high strength precast concrete (PC) panels. The idea of the method is to convert the existing hollow brick infill wall into a load carrying system by bonding PC panels on to the plastered hollow brick infills. For this purpose, six (two reference and four strengthened) one-th...
Prestressed concrete design of a wharf project.
Sari, Osman; Department of Civil Engineering (1971)
Refurbishing calibration and testing of the mechanical balance system of Ankara wind tunnel
Şahin, Burhan; Alemdaroğlu, Nafiz; Kavsaoğlu, Mehmet Ş.; Department of Aerospace Engineering (1998)
Citation Formats
A. Ashfaq, “Prefabrication of building elements external wall panels, colums and slabs in concrete.,” Middle East Technical University, 1977.