Prefabrication of Dwellings feasibility in developing countries on a system analysis of costs with special emphasis on Turkey.

1968
Arditti, David

Suggestions

Prefabrication of building elements external wall panels, colums and slabs in concrete.
Ashfaq, Ahmad; Department of Architecture (1977)
Prefabrication plant management and cost reduction analysis
Gök, Murat Serdar; Arıkan, Metin; Department of Civil Engineering (1998)
Retrofitting existing housing stock to achieve CO2 reduction targets
Serin, Bilge; Peker, Ender (2019-12-01)
Retrofit of Non-Ductile RC Frames with Precast Concrete (PC) Wall Panels
BARAN, MEHMET; Tankut, Tugrul (2011-12-01)
An economic, structurally effective and practically applicable strengthening method had been developed for reinforced concrete (RC) framed buildings. This study presents the test results on strengthening of deficient RC frames by using high strength precast concrete (PC) panels. The idea of the method is to convert the existing hollow brick infill wall into a load carrying system by bonding PC panels on to the plastered hollow brick infills. For this purpose, six (two reference and four strengthened) one-th...
Evaluatin of site-and-services approach in G.Khartoum ramifications on the land market and housing production.
Osman, Salaheldin M; Tünel, Ali; Department of City and Regional Planning (1992)
Citation Formats
D. Arditti, “Prefabrication of Dwellings feasibility in developing countries on a system analysis of costs with special emphasis on Turkey.,” Middle East Technical University, 1968.