A Micromechanics Based Numerical Investigation of Dual Phase Steels

Download

1-s2.0-S245232161930561X-main.pdf

Date

2019-01-01

Author

Yalçınkaya, Tuncay
Çakmak, Serhat Onur

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

225
views

130
downloads

The aim of this paper is to investigate the effects of microstructural parameters such as the volume fraction, morphology and spatial distribution of the martensite phase and the grain size of the ferrite phase on the plasticity and localized deformation of dual-phase (DP) steels. For this purpose, Voronoi based representative volume elements (RVEs) are subjected to proportional loading with constant stress triaxility. Two alternative approaches are employed in a comparative way to model the plastic response of the ferrite phase, namely, micromechanically motivated crystal plasticity and phenomenological J2 flow theory. The plastic response of the martensite phase, however, is modeled by the J2 flow theory in all the calculations. The predictions of both approaches closely agree with each other in terms of the overall macroscopic response of the DP steels, while clear differences are observed in the localized deformation patterns. The results of the present study are also compared with experimental and computational findings from the literature. (C) 2019 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/) Peer-review line: Peer-review under responsibility of the 1st International Workshop on Plasticity, Damage and Fracture of Engineering Materials organizers.

Subject Keywords

Dual-phase Steel, Representative Volume Element, Crystal Plasticity, Triaxiality, Localization

URI

https://hdl.handle.net/11511/30651

DOI

https://doi.org/10.1016/j.prostr.2019.12.087

Collections

Graduate School of Natural and Applied Sciences, Conference / Seminar

Suggestions

OpenMETU
Core

Modeling of localization and necking in dual phase steels through polycrystalline plasticity Çakmak, Serhat Onur.; Yalçınkaya, Tuncay; Department of Aerospace Engineering (2020) In this thesis, the effect of ferrite crystallographic orientation distribution and other microstructural parameters such as martensite morphology, martensite volume fraction, and ferrite grain size on the plastic deformation, localization, and the necking behavior of dual-phase steels are investigated. Two different type of finite element models, i.e. full size micron-scale polycrystalline samples and polycrystalline Representative Volume Element (RVEs) are built through Voronoi tessellation. Local crystal...
A crystal plasticity based finite element framework for RVE calculations of two-phase materials: Void nucleation in dual-phase steels Yalçınkaya, Tuncay; Çakmak, Serhat Onur (Elsevier BV, 2021-05-01) A crystal plasticity based finite element (CPFE) framework is developed for performing representative volume element (RVE) calculations on two-phase materials. The present paper investigates the mechanical response and the evolution of microstructure of dual-phase (DP) steels under uniaxial tensile loading, with a special focus on void nucleation. The spatial distribution and morphology of the ferrite and martensite grains in DP steels are explicitly accounted for by generating three-dimensional RVEs with V...
A Three dimensional mixed formulation nonlinear frame finite element based on hu-washizu functional Soydaş, Ozan; Sarıtaş, Afşin; Department of Civil Engineering (2013) A three dimensional nonlinear frame finite element is presented in this analytical study by utilizing Hu-Washizu principle with three fields of displacement, strain and stress in the variational form. Timoshenko beam theory is extended to three dimensions in order to derive strains from the displacement field. The finite element approximation for the beam uses shape functions for section forces that satisfy equilibrium and discontinous section deformations along the beam. Nonlinear analyses are performed by...
A PARYLENE BONDING BASED FABRICATION METHOD FOR GRAVIMETRIC RESONANT BASED MASS SENSORS Gokce, Furkan; Aydın, Eren; Kangül, Mustafa; Toral, Taylan B.; Zorlu, Ozge; Sardan-Sukas, Ozlem; Külah, Haluk (2017-06-22) In this study, a fabrication method utilizing parylene bonding for gravimetric resonant based mass sensors is presented. First, parylene bonding was experimentally tested and compared with the literature. Average shear strength was measured as 16.3 MPa (sigma=3MPa). Then, resonators located on top of a microchannel for real-time detection were fabricated using the presented method. Simulations and experiments verify proper operation of the fabricated resonators, and the applicability of the method for fabri...
A COMPARATIVE STUDY ON INTERACTIONS OF IONIC COLLECTORS WITH ORTHOCLASE ÖZÜN, Savaş; Atalay, Mustafa Ümit (2016-01-01) Flotation and adsorption characteristics of the most commonly used cationic and anionic collectors with high grade orthoclase were investigated through the electrokinetic potential measurement, microflotation, Fourier transform infrared spectroscopy (FTIR) and atomic force microscopy (AFM) studies. According to the obtained results, orthoclase had high flotation recovery with amine and oleic acid based (OAB) collector at certain pH ranges no flotation response was observed with petroleum sulfonate at differ...

Citation Formats

T. Yalçınkaya and S. O. Çakmak, “A Micromechanics Based Numerical Investigation of Dual Phase Steels,” 2019, vol. 21, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/30651.