Characterization of local Salmonella enteritidis isolates of chicken, egg and human origin

Download
2000
İçgen, Bülent

Suggestions

Analysis of forging for three different alloy steels
Civelekoğlu, Barış; Darendeliler, Haluk; Gökler, Mustafa İlhan; Department of Mechanical Engineering (2003)
Forging is a manufacturing process which is preferred among the others in that, the final product shows more enhanced properties. The properties of the final product are directly related with the material used in the forging process. Main parameters such as forging temperature, number of stages, preform design, dimensions of the billet, etc. may be affected by the forging material. Alloys are one of the main areas of interest in the forging industry. The use of alloy steels may bring superior properties, es...
Analysis of tapered preforms in cold upsetting
Gökler, Mustafa İlhan; Darendeliler, Haluk (1999-01-01)
Upset forging is usually carried out with a sequence of stages and the tapered preforms are commonly used. The preforms should be free from flash formation and buckling injuries. :In this paper, the results that depend on elastic-plastic finite element analysis of taper upset forging are given. The buckling analysis was realized by using the Modified Riks method. For a given upset ratio which is the ratio of unsupported length to diameter of the initial billet, reduction in the height of the billet and the ...
Characterization of the enzymes that play a role in chemical carcinogenesis purififcation and characterization of NADPH dependent cytochrome c reductase from sheep liver and lung microsomes.-
İşcan, Mesude; Department of Biological Sciences (1985)
Characterization of molybdenum oxide and magnesium doped zinc oxide charge transport layers deposited by sputtering for heterojunction solar cells
Bektaş, Gence; Yerci, Selçuk; Department of Micro and Nanotechnology (2017)
Group IV semiconductors can easily be doped by group III and V elements to possess p and n type behavior, respectively, which enables homojunction solar cell designs. However, most of the compound semiconductors including CIGS, CdTe and perovskite can intrinsically be either n or p type. Therefore, heterojunction structures with well-aligned conduction bands between the absorber and electron transport layer (ETL) and well-aligned valence bands between the absorber and hole transport layer (HTL) are required...
Detecting queue length on urban arterials using floating car data (FCD)
Altıntaşı, Oruç; Tüydeş Yaman, Hediye; Tuncay, Kağan; Department of Civil Engineering (2018)
Accurate estimation of queue lengths whether in the approach of a signalized intersection or near a bottleneck location along an uninterrupted urban arterial is essential for better traffic management. This requires reliable traffic data, which is traditionally obtained from loop detectors, video cameras, etc. More recently, Floating Car Data (FCD) is being increasingly used as an alternative traffic data source due to its lower cost and high coverage area. Commercially available FCD is obtained from GPS eq...
Citation Formats
B. İçgen, “Characterization of local Salmonella enteritidis isolates of chicken, egg and human origin,” Ph.D. - Doctoral Program, Middle East Technical University, 2000.