ASTM kinetics of oil shales

Date

1998-01-01

Author

Kök, Mustafa Verşan

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

212
views

0
downloads

Thermal analysis is increasingly being used to obtain kinetic data relating to sample decomposition. In this research differential scanning calorimeter (DSC) was used to determine the combustion kinetics of three (Can, Himmetoglu and Mengen) oil shale samples by ASTM and Roger & Morris methods. On DSC curves two reaction regions were observed on;oil shale sample studied except Can oil shale. In DSC experiments higher heating rates resulted in higher reaction temperatures and higher heat of reactions. Distinguishing peaks shifted to higher temperatures with an increase in heating rate. Three different kinetic models (ASTM I-II and Rogers & Morris) were used to determine the kinetic parameters of the oil shale samples studied. Activation energies were in the range of 131.8-185.3 kJ mol(-1) for ASTM methods and 18.5-48.8 kJ mol(-1) for Rogers & Morris method.

Subject Keywords

Combustion, Differential scanning calorimeter, Kinetics, Oil shale

URI

https://hdl.handle.net/11511/34760

Journal

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

DOI

https://doi.org/10.1023/a:1010109929197

Collections

Department of Petroleum and Natural Gas Engineering, Article

Suggestions

OpenMETU
Core

Kinetic analysis of DSC and thermogravimetry data for combustion of lignite Kök, Mustafa Verşan (1996-06-01) Thermal analysis increasingly being used to obtain kinetic data relating to sample decomposition. This work involves a comparative study of several methods used to analyse DSC and TG/DTG data obtained on the oxidation of Beypazari lignite. A general computer program was developed and the methods are compared with regard to their accuracy and the ease of interpretation of the kinetics of thermal decomposition. For this study, the ratio method was regarded as the preferred method, because it permits the estim...
Thermal behavior and kinetics of crude oils at low heating rates by differential scanning calorimeter Kök, Mustafa Verşan (2012-04-01) The objective of this research was to investigate thermal behavior and kinetics of different origin crude oils in limestone matrix by differential scanning calorimeter (DSC) at low heating rates. In DSC experiments, three distinct reaction regions were identified in all of the crude oil + limestone mixtures known as low temperature oxidation (LTO), fuel deposition (FD) and high temperature oxidation (HTO) respectively. Kinetic analysis of the crude oil samples was determined by different models known as AST...
Catalytic effects of metallic additives on the combustion properties of crude oils by thermal analysis techniques Kök, Mustafa Verşan (2001-08-20) Differential scanning calorimetry (DSC) was applied to crude oil combustion in the presence and absence of metal chlorides. It was observed that in the presence of smaller ratios of metallic additives, the surface reactions were predominant and the catalyst did not affect the reactions much. Three reaction regions were identified as low temperature oxidation (LTO), middle temperature oxidation (MTO) and high temperature oxidation (HTO). Kinetic parameters of the reaction regions were determined with two dif...
Calorimetric study approach for crude oil combustion in the presence of clay as catalyst Varfolomeev, Mikhail A.; Nurgaliev, Danis K.; Kök, Mustafa Verşan (2016-01-01) In this research, the effect of heating rate and different clay concentrations on light and heavy crude oils in limestone matrix was investigated by differential scanning calorimeter (DSC). In DSC experiments, two main distinct reaction regions were identified in all of the crude oil + limestone matrix + catalyst, known as low- and high-temperature oxidation respectively. It was observed that addition of clay to porous matrix significantly affected the thermal characteristics and kinetics of different origi...
The Characterization of a Tar Sand Sample Using Differential Scanning Calorimeters Senguler, I.; Kök, Mustafa Verşan (2013-01-01) In this study, non-isothermal kinetics and a thermal analysis tar sand sample is studied by differential scanning calorimeter and pressurized differential scanning calorimeter. Differential scanning calorimeter and pressurized differential scanning calorimeter curves revealed two reaction regions in the temperature range of 20-600 degrees C. Effect of pressure was also studied in order to see the thermal behavior of a tar sand sample under different elevated pressures. Two different kinetic methods (ASTM an...

Citation Formats

M. V. Kök, “ASTM kinetics of oil shales,” JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, pp. 567–575, 1998, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/34760.