Dynamic modeling of optical systems in order to study vibration effect on performance

Avsar, Ahmet Levent
Özgüven, Hasan Nevzat
In order to determine the vibration effects on performance in optical system, a simple vibratory model is proposed. The model suggested is compared with FE model. Both models are validated by modal tests for an existing simple optical system. The material properties of adhesive, which play an imported role in the vibratory model of an optical system, are found experimentally by using a simple test setup. The model suggested is used to investigate the dynamic behavior of the optical system under random vibration load conditions. It is concluded in this study that the analytical model suggested can successfully be used in preliminary design stage of simple optical systems when optical housing and lens behave rigidly in the frequency range of interest.


Dynamic performances of kinematically and dynamically adjustable planar mechanisms
İyiay, Erdinç; Soylu, Reşit; Department of Mechanical Engineering (2003)
In this thesis, the dynamic performances of kinematically and dynamically adjustable planar mechanisms have been investigated. An adjustable mechanism is here defined to be a mechanism where some of the kinematic and/or dynamic parameters are changed in a controlled manner in order to optimize the dynamic behaviour of the mechanism in spite of variable operating conditions. Here, variable operating conditions refer to variable load(s) on the mechanism and/or variable desired input motion. The dynamic behavi...
Design and Optimization of Nanoantennas for Nano-Optical Applications
Işıklar, Göktuğ; Ergül, Özgür Salih; Department of Electrical and Electronics Engineering (2020-9)
In this study, design and simulation of plasmonic nanoantenna structures to obtain high power enhancement capabilities at optical frequencies, as well as utilization of nanoantennas for imaging and sensing applications are presented. Plasmonic characteristics of nanoantennas, which depend on many parameters, such as material, frequency, geometry, and size, are investigated in detail via computational analyses of various nanoantenna structures. Numerical solutions of electromagnetic problems are performe...
Dynamic analysis of CMUTs in different regimes of operation
Bayram, Barış; Ergun, AS; Yaralioglu, GG; Khuri-Yakub, BT (2003-01-01)
This paper reports on dynamic analysis of an immersed single capacitive micromachined ultrasonic transducer (CMUT) cell transmitting. A water loaded 24 mum circular silicon membrane of a transducer was modeled. The calculated collapse and snapback voltages were 80 V and 50 V, respectively. The resonance frequency, output pressure and nonlinearity of the CMUT in three regimes of operation were determined. These regimes were: a) the conventional regime in which the membrane does not make contact with the subs...
Perturbation analysis of sheath evolution, with application to plasma source ion implantation
Bektursunova, RM; Demokan, O (IOP Publishing, 2001-02-07)
A perturbation model has been developed to describe the evolution of an expanding plasma sheath around a cathode after a high-voltage negative pulse is applied to the cathode, simulating the conditions in devices such as those used for plasma source ion implantation. The set of governing equations consists of two coupled collisionless fluid equations for ions, and Poisson's equation and Boltzmann's assumption for electrons. The time-dependent, self-consistent expressions for the potential, ion density and i...
Modeling of environmental temperature dependency for sensors operated by sagnac effect
Alaçakır, Ece; Çakır, Serhat; Department of Physics (2019)
In this thesis, the purpose is that theoretical, experimental and simulation environment are combined to observe and model the thermal sensitivity of a gyroscope which is operated by the principle of Sagnac effect. It is essential to enhance the knowledge and experience, and to gain ability to simulate for different thermal conditions for future developments of the advanced gyroscope technologies. This thesis investigates how external temperature change influences the performance of fiber optic gyroscopes, ...
Citation Formats
A. L. Avsar and H. N. Özgüven, “Dynamic modeling of optical systems in order to study vibration effect on performance,” 2010, vol. 7786, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/34931.