Optimum Nyquist filters with controlled time and frequency characteristics

2002-10-10
Tuncer, Temel Engin
Show full item record
Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
153
views
0
downloads
A design procedure is presented for pulse shaping filters based on the eigenfilter method. This method presents great flexibility for the control of the tail decay and stopband attenuation of the pulse shaping filters. A variety of optimum filters can be designed which are better than raised cosine filters both in time and frequency.
Electrical and Electronic Engineering
https://hdl.handle.net/11511/35306
ELECTRONICS LETTERS
Department of Electrical and Electronics Engineering, Article

Suggestions

Active clamped ZVS forward converter with soft-switched synchronous rectifier for high efficiency, low output voltage applications
Acik, A; Cadirci, I (Institution of Engineering and Technology (IET), 2003-03-01)
The analysis, design, and implementation of an active clamped ZVS forward converter equipped with a soft-switched synchronous rectifier (ACFC-SR), proposed for high-efficiency low output voltage DC-DC converter applications, is presented. The converter efficiency is maximised due to soft switching of the main, active clamp, synchronous rectifier, and freewheeling MOSFET switches. The operating principles of the ACFC-SR are analysed in detail, and the converter performance is compared with that of alternativ...
Circumferential Traveling Wave Slot Array on Cylindrical Substrate Integrated Waveguide (CSIW)
Bayraktar, Omer; Aydın Çivi, Hatice Özlem (Institute of Electrical and Electronics Engineers (IEEE), 2014-07-01)
Traveling wave slot array on cylindrical substrate integrated waveguide (CSIW) is designed, fabricated and measured at K-band. CSIW is formed by wrapping the substrate integrated waveguide (SIW) around the cylinder in the circumferential direction. 16 element longitudinal slot array on the broad wall of single CSIW is designed by the Elliot's design procedure. The spacings between the slot elements are determined to reduce the half power beam width (HPBW) and to obtain good matching at 25 GHz. A 4 x 16 slot...
Nested U-ring resonators: a novel multi-band metamaterial design in microwave region
Turkmen, O.; EKMEKÇİ, Evren; Sayan, Gönül (Institution of Engineering and Technology (IET), 2012-07-17)
In this study, a novel metamaterial topology, called M-band nested U-ring resonator (M-NURR), is proposed to provide multiple band operation with an electrically small and geometrically simple unit cell design. The M-NURR unit cell has M-nested and unconnected U-shaped metal rings printed on a dielectric substrate where each ring is primarily associated with a distinct LC type resonance frequency where L and C stand for inductance and capacitance, respectively. Therefore this M-NURR topology has the novel p...
3D object recognition from range images using transform invariant object representation
AKAGÜNDÜZ, erdem; Ulusoy, İlkay (Institution of Engineering and Technology (IET), 2010-10-28)
3D object recognition is performed using a scale and orientation invariant feature extraction method and a scale and orientation invariant topological representation. 3D surfaces are represented by sparse, repeatable, informative and semantically meaningful 3D surface structures, which are called multiscale features. These features are extracted with their scale (metric size and resolution) using the classified scale-space of 3D surface curvatures. Triplets of these features are used to represent the surfac...
Hybrid connection of RF MEMS and SMT components in an impedance tuner
Unlu, Mehmet; Topalli, Kagan; Atasoy, Halil Ibrahim; Demir, Şimşek; Aydın Çivi, Hatice Özlem; Akın, Tayfun (Elsevier BV, 2010-01-01)
This paper presents a systematic construction of a model for a hybrid connected RF MEMS and SMT components in a reconfigurable impedance tuner. The double stub hybrid impedance tuner which employs a high number of MEMS switches is selected to demonstrate the feasibility of the connections. In the hybrid tuner, MEMS switches are actuated with DC bias signals, where SMT resistors de-couple RF from the DC lines. The hybrid tuner is realized in two steps, where the MEMS impedance tuner is fabricated on a glass ...
Citation Formats
T. E. Tuncer, “Optimum Nyquist filters with controlled time and frequency characteristics,” ELECTRONICS LETTERS, pp. 1292–1293, 2002, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/35306.
METU IIS - Integrated Information Service open@metu.edu.tr