Study Case of Solar Thermal and Photovoltaic Heat Pump System for Different Cities in Turkey

2016-10-14
Moia-Pol, Andreu
Pujol-Nadal, Ramon
Martinez-Moll, Victor
Bonyadi, Nima
Baker, Derek
The combination of solar thermal, photovoltaic, and heat pump technologies is a welcome advancement in countries with large solar resources such as Turkey. These systems could have similar efficiencies throughout the year for different locations in Turkey if we adjust the solar storage according to the weather conditions. In this paper, solar heating with a heat pump system for buildings have been designed to achieve different values of the fraction of primary energy saved using Flat Plate Collectors (FPC) and solar photovoltaic (PV) technology, and having a high system efficiency resulting in net zero energy for thermal production.

Suggestions

MONITORING, ANALYSIS, AND SIMULATION OF PHOTOVOLTAIC HEAT ISLAND EFFECT IN TURKEY: SEKBANDEMIRLI SOLAR POWER PLANT FIELD STUDY
Demirezen, Emre; Akınoğlu, Bülent Gültekin; Özden, Talat; Department of Earth System Science (2022-1-18)
Today, solar energy conversion technologies, which are among the methods of obtaining renewable, sustainable, and clean energy, show rapid development. One of the most common technologies is Photovoltaic Solar Power Plant (PVPP), which provides electricity by direct conversion of the energy carried by the sunlight (or daylight). These power plants are socially accepted in environmentally-friendly and economical energy production. However, there are some debates about the environmental impacts of these power...
Analysis And Assessment Of Daily And Seasonal Photovoltaic Heat İsland Effect On Sekbandemirli Rural Region By Local Weather Data Records
DEMİREZEN, EMRE; ÖZDEN, TALAT; Akınoğlu, Bülent Gültekin (2022-1-01)
Photovoltaic Power Plants have a considerable share among solar energy conversion technologies toward environmentally sustainable and economically feasible electricity production. However, when a rural region's land surface formed by natural soil types is covered by a Photovoltaic Power Plant (PVPP)'s dark-colored solar modules in large numbers, an artificial albedo (reflectivity) change is expected on that surface. Because of the heat exchange between these modules and the air surrounding them due to albed...
Numerical investigation of circulating fluidized bed riser hydrodynamics for concentrating solar thermal receiver applications
Bilyaz, Serhat; Tarı, İlker; Department of Mechanical Engineering (2015)
Various heat transfer fluids and thermal storage materials are considered for concentrating solar power systems to improve the storage capability of the system which compensates the fluctuating behavior of the solar resources. Solid particles can be a good alternative since they have high sensible heat capacity. In addition, they are cheap, environmentally benign and chemically and mechanically stable at high temperatures. In this thesis, hydrodynamics of circulating fluidized bed solar receiver was numeric...
Assessment of solar data estimation models for four cities in Iran
Jahani, Elham; Sadati, S. M. Sajed; Yousefzadeh, Moslem (2015-04-29)
The estimated solar resources are important for designing renewable energy systems since measured data are not always available. The estimation models have been introduced in several studies. These models are mainly dependent on local meteorological data and need to be assessed for different locations and times. The current study compares the results of Angstrom's model and a neural network (NN) model developed for this study with measured data for four cities in Iran. The time resolution for the estimated ...
Optimizing the orientation of solar photovoltaic systems considering the effects of irradiation and cell temperature models with dust accumulation
Al-Ghussain, Loiy; Taylan, Onur; Abujubbeh, Mohammad; Hassan, Muhammed A. (2023-01-01)
To cope with the growing installation capacities of solar photovoltaic (PV) systems in desert areas, it is necessary to revisit the energy production models and the optimal angles of PV panels given the significant impacts of ambient temperature, wind speed, dust accumulation, and cleaning frequency. In this study, these four factors are examined for four PV technologies (polycrystalline, microcrystalline, monocrystalline, and thin-film) at three cities in Jordan, Egypt, and Tunisia using precise ground-lev...
Citation Formats
A. Moia-Pol, R. Pujol-Nadal, V. Martinez-Moll, N. Bonyadi, and D. Baker, “Study Case of Solar Thermal and Photovoltaic Heat Pump System for Different Cities in Turkey,” 2016, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/35762.