Variation of the lattice parameters of tourmaline crystals with temperature

Download

002835.pdf

Date

1988

Author

Haamdan, Nasser M

Metadata

Show full item record

Item Usage Stats

50
views

0
downloads

URI

https://hdl.handle.net/11511/3595

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

VARIATION OF THE LATTICE-PARAMETERS OF A BI-BASED SUPERCONDUCTOR WITH TEMPERATURE HAMDAN, NM; OZKAN, H; ZIQ, KA; ALBIS, BA (1994-12-01) Variation of the lattice parameters and thermal expansion coefficients of Bi-2223 superconductor have been measured from room temperature up to the melting point using X-ray diffraction. The lattice parameters (a and c) gradually increase up to about 250 degrees C. Between 250 degrees C to 450 degrees C the variation of the lattice parameters are quite anomalous, in that a remains almost constant while c decreases. From 450 degrees C to 600 degrees C both parameters gradually increase. Above 650 degrees C t...
Variation of the elastic constants of tourmaline with chemical composition Tatli, Ali; Galioğlu Özkan, Yeliz (Springer Science and Business Media LLC, 1987-2) Elastic wave velocities and lattice parameters of five tourmaline specimens with different chemical compositions have been measured. The piezoelectric effects on the elastic constants have been found to be small and can be neglected. Variations of the elastic wave velocities and elastic constants of the different tourmaline specimens indicate that: (i) partial substitution of Al by Fe in the structure decreases the shear wave velocities, (ii) replacement of Na by Ca increases the resistance of the structure...
Change of physical and thermal decomposition properties of in situ heavy oil with steam temperature Karacan, CO; Okandan, E (Informa UK Limited, 1997-01-01) Ikiztepe crude oil was subjected to four different steam temperatures during steam injection which was applied as an enhanced oil recovery process on a linear limestone model saturated with oil. Produced oils were characterized using density, viscosity measurements, pyrolysis experiments utilizing TGA and elemental analysis runs. Results showed that produced crude oils change in measured characteristics as compared to the original oil. These changes include an increase in H/C, and cracking activation energy...
Variation of the Young's modulus and the internal friction coefficient of beta brass with temperature. Aşkın, Cahit; Department of Metallurgical Engineering (1968)
Variation of hardness and modulus across the thickness of Zr-Cu-Al metallic glass ribbons Melgarejo, Z. Humberto; Jakes, J.E.; Hwang, J.; Kalay, Yunus Eren; Kramer, M.J.; Voyles, P.M.; Stone, D.S. (2013-01-01) We investigate through-thickness hardness and modulus of Zr50Cu45Al5 metallic glass melt-spun ribbon. Because of their thinness, the ribbons are challenging to measure, so we employ a novel nanoindentation based-method to remove artifacts caused by ribbon flexing and edge effects. Hardness and modulus vary approximately linearly across the thickness but, unlike bulk ingots, the side of the ribbon that cooled most quickly had the highest hardness and modulus. This “inverse” variation may be caused by the fas...

Citation Formats

N. M. Haamdan, “Variation of the lattice parameters of tourmaline crystals with temperature,” Middle East Technical University, 1988.