Design of triple-band reconfigurable microstrip antenna employing RF-MEMS switches

Date

2004-06-26

Author

Onat, S
Alatan, Lale
Demir, S

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

154
views

0
downloads

A triple-band inset-fed reconfigurable microstrip antenna is designed. The switching between the three different frequency bands is achieved through the use of RF-MEMS switches placed along the inset and along the slot placed on the radiating patch.

Subject Keywords

Microstrip antennas, Radiofrequency microelectromechanical systems, Frequency, Switches, Feeds, Wireless LAN, Communication switching, Cellular phones, Polarization, Design engineering

URI

https://hdl.handle.net/11511/36502

DOI

https://doi.org/10.1109/aps.2004.1330551

Collections

Department of Electrical and Electronics Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Design of a Re-configurable dual frequency microstrip antenna with integrated RF MEMS switches Onat, Sinon; Ünlü, Mehmet; Alatan, Lale; Demir, Şimşek; Akın, Tayfun (2005-07-08) The complete design of a re-configurable dual frequency antenna structure, including its integrated RF MEMS switches and their actuation lines together with a CPW feed, is introduced. The number of switches used in the inset is decreased compared to the hybrid design we presented previously (Onat, S. et al., IEEE Int. Antennas and Propag. Symp., vol.2, p.1812-15, 2004). Instead of utilizing available RF MEMS switches, new switches suitable for this application are designed. Two different switch configuratio...
Reconfigurable CPW-FED dual-frequency rectangular slot antenna using RF MEMS technology Erdil, Emre; Topalli, Kagan; Aydın Çivi, Hatice Özlem; Akın, Tayfun (2005-07-08) A reconfigurable dual-frequency rectangular slot antenna using MEMS technology is presented. In this structure, a rectangular slot antenna is integrated with MEMS cantilever type capacitors. Simulation results show that the structure has a dual frequency behavior where both of the resonant frequencies can be reconfigured dynamically. By the actuation of MEMS cantilevers, the lower resonant frequency shifts 1.2 GHz, whereas the higher resonant frequency has a shift of 330 MHz without any distortion of the ra...
Design of Irregularly Shaped Patch Antennas by using the Multiport Network Model Sener, Goker; Alatan, Lale; Kuzuoğlu, Mustafa (2008-07-11) The multiport network model (MNM) is an analytical method that is used to analyze microstrip antennas. MNM is based on defining ports along the periphery of the patch and evaluating the impedance matrix corresponding to these ports by using the Greenpsilas function for the cavity under the patch. For regular rectangular, triangular and circular patches, analytical expressions for the Greenpsilas function are available. In the analysis of irregular patches, Greenpsilas functions cannot be calculated explicit...
Design and Implementation of Transmitting and Receiving Antenna Pair on Flat Ring Surface Haykir, Yigit; Karadağ, Savaş; Dagdeviren, Birkan; Demir, Şimşek (2018-11-02) In this work, design and implementation of broadside altimeter antenna on circular ring surface are performed. Utilizing array factor formulation, possible locations for circular array elements are chosen. Slitted microstrip patch antennas are used for an efficient design. Satisfactory results are obtained for an altimeter antenna that can be utilized in missile, aircraft or spacecraft applications.
Analysis and design of cylindrically conformal microstrip antennas Taşoğlu, Ali Özgür; Dural Ünver, Mevlüde Gülbin; Department of Electrical and Electronics Engineering (2011) Cylindrically conformal microstrip antennas are investigated. Two different structures, namely proximity coupled and E-shaped microstrip antennas are analyzed and information about the design parameters is obtained by means of parametric study. With these structures, cylindrical arrays, having omnidirectional radiation in the circumferential plane of the cylinder, are designed. Proximity coupled cylindrical arrays operate in the 2.3-2.4 GHz aeronautical telemetry band with approximately 4% bandwidth. On the...

Citation Formats

S. Onat, L. Alatan, and S. Demir, “Design of triple-band reconfigurable microstrip antenna employing RF-MEMS switches,” 2004, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/36502.