# Nonlinear 3D Modeling and Vibration Analysis of Horizontal Drum Type Washing Machines

2020-01-01
In this study, a nonlinear 3-D mathematical model for horizontal drum type washing machines is developed considering rotating unbalance type excitation. Nonlinear differential equations of motion are converted into a set of nonlinear algebraic equations by using Harmonic Balance Method (HBM). The resulting nonlinear algebraic equations are solved by using Newton’s method with arc-length continuation. Several case studies are performed in order to observe the effects of orientation angles of springs and dampers between drum and the cabinet. In order to reduce the steady state vibration amplitude of the drum, suitable orientation angles of the springs and dampers and their implementation locations are identified. Moreover, in order to further reduce the vibration amplitude of the drum at high frequencies, instead of viscous dampers, dry friction dampers are introduced to the system. Effect of orientation angles and parameters of the dry friction damper and springs on the force transmitted to the cabinet are studied

# Suggestions

 Nonlinear modeling and vibration analysis of horizontal drum type washing machines Baykal, Cem; Yazıcıoğlu, Yiğit; Department of Mechanical Engineering (2019) Nonlinear two and three-dimensional dynamical models for horizontal drum type washing machines are developed considering rotating unbalance type excitation. Nonlinear differential equations of motion are converted into a set of nonlinear algebraic equations by using the Harmonic Balance Method (HBM). The resulting nonlinear algebraic equations are solved by using Newton’s method with arc-length continuation. Several case studies are performed in order to observe the effects of orientation angles of springs ...
 Vibration analysis of washing machines in the drum plane Baykal, Cem; Ciğeroğlu, Ender; Yazıcıoğlu, Yiğit (Springer, Cham; 2019-02-20) In this study, a nonlinear mathematical model for drum-type washing machines is developed considering rotating unbalance type excitation. Nonlinear differential equations of motion are converted into a set of nonlinear algebraic equations by using harmonic balance method (HBM). The resulting nonlinear algebraic equations are solved by using Newton’s method with arc-length continuation. Several case studies are performed in order to observe the effects of orientation angles of springs and dampers supporting ...
 Nonlinear vibration analysis of functionally graded beams Dedeköy, Demir; Ciğeroğlu, Ender; Bediz, Bekir; Department of Mechanical Engineering (2022-8) In this thesis, nonlinear forced vibrations of functionally graded (FG) Euler-Bernoulli Beams are studied. Two types of nonlinearities, large deformation nonlinearity and nonlinearities resulting from rotating beam dynamics, are considered. The Spectral Chebyshev Technique (SCT) is employed for solving governing equations of the spectral-temporal boundary value problems of beam vibrations, which do not always have closed-form analytical solutions. The SCT is combined with Galerkin’s method to obtain spatial...
 Nonlinear Vibration Analysis of Uniform and Functionally Graded Beams with Spectral Chebyshev Technique and Harmonic Balance Method Dedekoy, Demir; Ciğeroğlu, Ender; Bediz, Bekir (2023-01-01) In this paper, nonlinear forced vibrations of uniform and functionally graded Euler-Bernoulli beams with large deformation are studied. Spectral and temporal boundary value problems of beam vibrations do not always have closed-form analytical solutions. As a result, many approximate methods are used to obtain the solution by discretizing the spatial problem. Spectral Chebyshev technique (SCT) utilizes the Chebyshev polynomials for spatial discretization and applies Galerkin's method to obtain boundary condi...
 Nonlinear Vibrations of a Beam with a Breathing Edge Crack Batihan, Ali C.; Ciğeroğlu, Ender (2015-02-05) In this paper, nonlinear transverse vibration analysis of a beam with a single edge crack is studied. In literature, edge cracks are generally modeled as open cracks, in which the beam is separated into two pieces at the crack location and these pieces are connected to each other with a rotational spring to represent the effect of crack. The open edge crack model is a widely used assumption; however, it does not consider the nonlinear behavior due to opening and closing of the crack region. In this paper, a...
Citation Formats
C. Baykal, E. Ciğeroğlu, and Y. Yazıcıoğlu, “Nonlinear 3D Modeling and Vibration Analysis of Horizontal Drum Type Washing Machines,” 2020, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/37613. 