Flow Visualization and Force Measurements on Accelerated Revolving Flat Plates at Low Reynolds Numbers



Flow visualization and determination of temperature distribution in inclined channels
Sağlamcı, Abdülaziz Mehmet; Bayer, Özgür; Department of Mechanical Engineering (2018)
Subway transportation systems play an important role in human life in this century. Millions of people make use of subway transportation every day in metropolises. In subways, there is a very crucial situation "case of fire and smoke generation" that must be prevented. In subway areas, it is known that stairs are used to connect the ground with the subway area, metro stations in other words. Stairs have an angle with the ground horizontal called as tilt angle. The most important case of smoke movement in ca...
Flow characterization study and fire experiments in a reduced scaled tunnel
Abuaisheh, Majd Basil Abdel Muhsen; Yozgatlıgil, Ahmet; Pınarcıoğlu, Mehmet Melih; Department of Mechanical Engineering (2019)
This work is an experimental study on the subject of tunnel fires, which is conducted on a ventilated 1/13 scaled tunnel model in the Fluid Mechanics Laboratory, Department of Mechanical Engineering of Middle East Technical University. In order to perform the experiments, in the first stage, the tunnel model was completely renovated, and its overall condition was improved to obtain better means of control and accuracy on the experimental measurements. In the second stage of the thesis, a flow characterizati...
Flow velocity measurements of a plasma torch
Turkyılmaz, Bahadır; Özdemir, Devrim; Mansuroğlu, Doğan; Uzun Kaymak, İlker Ümit (2017-09-10)
Flow induced polymer-filler interactions: Bound polymer properties and bound polymer-free polymer phase separation and subsequent phase inversion during mixing
Akay, G. (Wiley, 1990-11)
The irreversible absorption of macromolecules on to solid filler particles during mixing in the melt is investigated. The molecular weight and concentration dependence of the absorbed layer thickness are evaluated and the chemical and morphological nature of the irreversibly absorbed polymer (bound polymer) are determined. It is found that the thickness of the bound polymer is not only dependent on the filler concentration but also dependent on polymer molecular weight. Bound polymer in high density polyeth...
Flow-shop scheduling subject to renewable resourse constraint: unit-processing time problems
Süral, Haldun; Kondakçı, Suna; Department of Electrical Engineering (1988)
Citation Formats
M. Perçin, “Flow Visualization and Force Measurements on Accelerated Revolving Flat Plates at Low Reynolds Numbers,” 2015, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/38138.