Mass transfer studies in a tube extractor.

1965
Çiftçiler, Gülay

Suggestions

Mass transfer studies in a helical extractor.
Aras, Orhan; Department of Chemical Engineering (1968)
Mass transfer studies in a fulsed helical extractor.
Uysal, Zühtü B; Department of Chemical Engineering (1974)
Mass transfer studies in a gas-liquid contactor mixed with an injector
Baylakoğlu, İlknur; Gürkan, Türkan; Department of Chemical Engineering (1987)
Mass transfer coefficients in mobile bed contacting.
Özmelek, Levent; Department of Chemical Engineering (1985)
Mass transfer and kinetics in oxygen delignification
Doğan, İsmail; Yücel, Hayrettin; Department of Chemical Engineering (2005)
In this study, the kinetic analysis of oxygen delignification of Turkish southern hardwood Kraft pulp was carried out. Kraft pulp was obtained from Mopak Dalaman pulp and paper mill. The kinetic rate data were collected in a 1 L high pressure batch reactor. The delignification experiments were carried out under a wide range of industrially significant conditions of temperature (90, 100 and 110 oC), alkali charge (1, 3, 5% on oven dry pulp), and oxygen partial pressure (0.5, 3.5, 6.5 bar). In order to achiev...
Citation Formats
G. Çiftçiler, “Mass transfer studies in a tube extractor.,” Middle East Technical University, 1965.